Accessories for tool holder cones

This adaptor allows you to install tools with straight bit shank in a half gas spindle, or in a half gas tool holder. It's an adaptor heavily used in CNC stone router for engravings and letterings because those kinds of diamonds tools have mainly a straight shank fitting. It’s possible to ...

Available on request: VEVTT-2-ISO30 for tool holder cone ISO 30 VEVTT-2-ISO40 for tool holder cone ISO 40 VEVTT-2-ISO50 for tool holder cone ISO 50 VEVTT-2-HSK40 for tool holder cone HSK 40 VEVTT-2-HSK63 for tool holder cone HSK 63

This spindle cleaner is available for different type of tool holders: ISO 40, ISO 50, HSK 63A, HSK 80B. It easily and rapidly cleans the spindle cone. Special cotton strips for avoiding damages. The image refers to the ISO40 spindle cleaner.

This digital height gage is used for the tool height measuring in CNC applications. Measuring range: 300 mm Counter zero-adjustment at any height within the measuring range Precision: 0.01 mm Selector in inches and mm

This adapter allows to use magnetic tool (usually used to polish) in spindle with 1/2 gas fitting. The spring loaded adapter is a special tool holder made on request.

CNC Tool Clamper 90° used for disassembling the tool from the cone (tool holder). We have available various models of this tool clamper and it depends on tool holder type. Have a look at the following table to choose the right tool clamper for your tool holder cones:

ER Collet Wrenches for ER20, ER25, ER32 and ER40 collets. This is a simple tool and a must-have for any marble CNC worker that has to replace often tools in his machine. Save time and avoid to damage the spindle or the ER Collet. This wrenches for ER collets have also a comfortable soft grip. T...

The most widely used clamping system for straight shank diamond tools is the ERCollet Available in 4 different sizes: ER16 Collet --> dimension of 17 x h.28 mm and it's available in different diameters from 3 mm to 10 mm ER20 Collet --> dimension of 21 x h.31 mm and it's a...