CNC accessories and tool adapters
Brackets, adapters from one fitting to another, extensions, ER collets and petal Collets for all types of CNC machines and for all types of diamond tools.
When working with a CNC machine, it is often necessary to use tools that have fittings that are not good for the electrospindle of the machine.
It is also possible that for special needs it is necessary to have extensions and reductions.
In this section, you will find a series of special accessories that allow the marble worker, and any CNC operator, (also in the glass, wood and metals sectors) to adapt the spindle fitting to the tool to be used.
You find also accessories for the maintenance of the spindles and the tool holders.
- Sort by Default Order
- Display 40 Products per page
Mechanical clamping system for CNC machine
If your machine does not have the vacuum system to use the suction cups, then to block the pieces to be machined, you need a kit of mechanical clamps (usually a kit consists of 4 clamps).
These clamping brackets are ideal for CNC router for working marble, glass or wood.
The price refers to a si...
Brand: GNC Meccanica | Dimension: L= 200 mm | Weight: 0.9 Kg | Material: AluminumShipped within 3-5 days
Touch probe 3D Measuring sensor - 3D Finder
This is 3D finder Touch Probe sensor is used for scanning, copying, and acquisition of workpieces' shapes (edges, holes, angles).
Note:
It's a Mechanical Touch Probe active, this means it needs to be powered and with a tip probe of 2 mm.
Touch Probe Applications:
Fast zero-point acqui...
Contact type: NC (Normally closed) | Tool fitting: Cylindrical 8 mm2 in stock (more shipped in 5-10 days)
Adaptor Flange > M14 - Nicolai
Verifying quantity...
Adaptor 1/2 Gas > ER Collet Chuck
This adaptor allows you to install tools with straight bit shank in a half gas spindle, or in a half gas tool holder.
It's an adaptor heavily used in CNC stone router for engravings and letterings because those kinds of diamonds tools have mainly a straight shank fitting.
It’s possible to ...
Brand: IMS | Motor fitting: 1/2 Gas | Thread: RightDifferent options: verify stock
Spring loaded adapter 1/2 Gas > Magnetic - IMS
This adapter allows to use magnetic tool (usually used to polish) in spindle with 1/2 gas fitting.
The spring loaded adapter is a special tool holder made on request.
Brand: IMS | Material: Stainless Steel | Diameter: 98 mm | Motor fitting: 1/2 Gas | Tool fitting: Magnetic BackingDifferent options: verify stock
Tool length setter for CNC Machine
Professional Tool Length Setter device for measuring the height of the tool in cnc machines and working centers.
It is compatible with any control with a NC input (Normally Closed).
This probe has 2 contacts, each of them has 2 wires that create a simple electrical contact. These electrical c...
Brand: HNC | Height: 66 mm | Contact diameter: 30 mm | Material: Iron, Stainless Steel | Power supply: DC24V 20mA | Protection level: IP68 | Contact lifetime: 5 million times | Contact force: 1.5 N | Repeatability: 0,002 mm | Recommended speed: 50/200 mm/min6 in stock (more shipped in 5-10 days)
Touch probe 3D Measuring sensor - Amastone
This is the amastone touch probe sensor for CNC machines that allows you to scan, copy, and acquire workpieces' shapes (edges, holes, angles).
Note:
This probe is passive so it doesn't need and wire to power it and the tip probe is 4 mm.
Touch Probe Applications:
Fast zero-p...
Contact type: NC (Normally closed) | Tool fitting: Cylindrical 7 mm0 in stock (more shipped in 5-10 days)
Adaptor profile wheels 35 mm Bore > 22 mm Bore - Nicolai
Brand: Nicolai Diamant | Diameter: 35 mmDifferent options: verify stock
Adaptor 1/2 Gas > Thread for profile wheels - Nicolai
Brand: Nicolai Diamant | Thread: Right | Motor fitting: 1/2 GasDifferent options: verify stock
Adaptor 1/2 Gas > Small Flange - Nicolai
This adaptor can be used with stubbing wheels small diameter (50 mm) on CNC machine with 1/2" fitting.
he choice of the adapter depends on the type of stubbing wheel you are using. The fitting can be:
with central bore 10 mm + 2 fixing holes
with central bore 14 mm + 3 fixing holes
...
Brand: Nicolai Diamant | Diameter: 30 mm | Fitting: 1/2 Gas Different options: verify stock
Adaptor 1/2 Gas > Flange Ø50 mm - Nicolai
Fitting machine: 1/2 Gas
Fitting tool: Ø50+6M6/63
Height 35 mm is the dimension of the whole adapter excluding the threaded part and the conical part
Height 60 mm is the dimension of the whole adapter + the threaded part + the conical part
Brand: Nicolai Diamant | Diameter: 72 mm | Height: 35 mm | Total height: 60 mm Verifying quantity...
Extensions 1/2 Gas > 1/2 Gas (Female) - Nicolai
This video shows a 1/2 Gas to 1/2 Gas (female) adapter with a length of 100 mm (Code AZT2578A)
Brand: Nicolai Diamant | Diameter: 28 mm Different options: verify stock
Adaptor Flange Ø50 > Small Flange - Nicolai
This adaptor can be used with stubbing wheels small diameter (50 mm) on CNC machine with fitting bore 50 mm + 6 hole.
The choice of the adapter depends on the type of stubbing wheel you are using. The fitting can be:
with central bore 10 mm + 2 fixing holes
with central bore 14 mm + 3 ...
Brand: Nicolai Diamant | Diameter: 38 mm | Motor fitting: Flange 6 Bores Different options: verify stock
Adaptor Flange > 1/2 Gas (Female) - Nicolai
Different options: verify stock
Flange Extensions - Nicolai
Different options: verify stock
Adaptor 1/2 Gas > M10, M12
If you are a CNC operator you have been in the need to use a diamond tool with a fitting M10 or M10 with a half-gas electro-spindle.
In this case, you can use this adapter in order to use the tool.
The 1/2' GAS adapter is available in different lengths from 30 mm up to 150 mm.
Brand: Nicolai Diamant | Fitting: 1/2 Gas Different options: verify stock
Adaptor 1/2 Gas > Cylindrical shank - Nicolai
Brand: Nicolai Diamant | Fitting: 1/2 GasDifferent options: verify stock
Petal collet - Type SSKIGAKABPT1 - IMS
NOTE:
This model of petal collet is made only on request and it's not available in stock
It's possible to order 2 models of this petal collet:
SSKIGIKABPT1ISO40: Model for ISO40 spindles
SSKIGIKABPT1ISO50: Model ISO50 spindles
For more information please contact us: info@amastone....
Brand: IMS | Material: Stainless SteelContact us to verify stock
Petal collet - Type SSKIGIKADIN - IMS
With the photo of the petal collet you find also the technical drawing. Please check it before placing your online order and if you have any doubt don't hesitate to contact us sending the model of the spindle that you have and the model of your CNC machine.
This petal collet is typically used on ...
Brand: IMS | Material: Stainless SteelDifferent options: verify stock
Petal collet - Type SSKIGKADIN - IMS
Petal collets type SSKIGKADIN for spindles and electro spindles.
We have also these petal collets on request:
SSKIGKA45DIN
SSKIGKA60DIN
for further information please contact us info@amastone.com
Brand: IMS | Material: Stainless SteelDifferent options: verify stock
Petal collet - Type SSKKADIN - IMS
Petal collets type SSKKADIN for spindles and electro spindles.
These models of petals collets (SSKKA45DIN and SSKKA60DIN) is made only on request and it’s not available in stock. For more information please contact us: info@amastone.com
Brand: IMS | Material: Stainless SteelDifferent options: verify stock
Petal collet - Type SSKADIN - IMS
Petal collets type SSKADIN for spindles and electro spindles.
These models of petals collets (SSKA45DIN and SSKA60DIN) is made only on request and it’s not available in stock. For more information please contact us: info@amastone.com
Brand: IMS | Material: Stainless SteelDifferent options: verify stock
Petal collet - Type SSKAANSI - IMS
Petal collets model SSKAANSI for CNC spindles and electro spindles.
Petal Collet allows the automatic locking of tool holders.
In details, a petal collet is for hooking pull studs for both ISO and BT CNC tool holders with an angled pull stud.
Tested up to 2.000.000 cycles
High pr...
Brand: IMS | Material: Stainless SteelDifferent options: verify stock
Wrench for Nuts collets ER
ER Collet Wrench for ER20, ER25, ER32 and ER40 collets. This is a simple tool and a must-have for any marble cnc worker that has to replace often tools in his machine. Save time and avoid to damage the spindle or the ER Collet.
This wrench for er collet has also a comfortable soft grip.
The 4 p...
Nuts type: Collet ER20, Collet ER25, Collet ER32, Collet ER40Different options: verify stock
Adaptor 1/2 Gas > M30 - IMS
Brand: IMS | Tool fitting: M30 | Material: Stainless Steel "Endurance"Different options: verify stock
1/2 Gas Extension - IMS
Brand: IMS | Tool fitting: 1/2 Gas | Material: Stainless Steel "Endurance"Different options: verify stock
ER Collet
The ER collet is the most widely used clamping system for straight shank diamond tools.
Available in three sizes:
ER16 Collet --> dimension of 17 x h.28 mm and it's available in different diameters from 3 mm to 10 mm
ER20 Collet --> dimension of 21 x h.31 mm and it's avail...
Height: 28 mm, 31 mm, 34 mm, 40 mm | Condition: NewDifferent options: verify stock
