Grid View | List View
    GNC Pneumatic back stop
    217,50  exc. VAT
    View

    Pneumatic back stop - GNC

    Pneumatic Back Stops allows getting an automatic centering of the workpieces in the CNC table. Body frame in anodized aluminum Rectified Pneumatic Brass cylinder Stainless steel piston Striking pin plastic Viton seals for durability Aluminum support locking Bottom seal silic...
    Brand: GNC Meccanica
    Shipped within 3-5 days

    ER collet chuck holder cone ISO 40
    From: 261,23  From: 195,90 
    View

    ER collet chuck holder cone ISO 40 - Pedrini Cobalm and other - IMS

    Brand: IMS | Tool fitting: Collet ER32, Collet ER40 | Type: Bavelloni, Campagnola & Fedeli, Chiarini, Cobalm, Donatoni, Noat, Pedrini, Scandinvent, Terzago
    Different options: verify stock
    Material:
    Stainless Steel "Endurance"
    Model:
    MVBA132
    Contact us to verify stock
    Material:
    Black "Darkside"
    Model:
    MVBA132
    Contact us to verify stock
    Material:
    Stainless Steel "Endurance"
    Model:
    MVBA131
    Contact us to verify stock

    Drill point holder cone ISO 40 - Pedrini Cobalm and other
    From: 120,40  From: 90,30 
    View

    1/2 Gas drill point holder cone ISO 40 - Cobalm, Donatoni, Bavelloni and other - IMS

    This video shows a tool holder cone with code MVBA099.
    Brand: IMS | Tool fitting: 1/2 Gas, M30 | Type: Bavelloni, Campagnola & Fedeli, Chiarini, Cobalm, Donatoni, Noat, Pedrini, Scandinvent, Terzago
    Different options: verify stock
    Model:
    MVBA107
    Material:
    Stainless Steel "Endurance"
    Contact us to verify stock
    Model:
    MVBA107
    Material:
    Black "Darkside"
    Contact us to verify stock
    Model:
    MVBA106
    Material:
    Stainless Steel "Endurance"
    Contact us to verify stock

    Pull stud for tool holder cone ISO 40
    From: 16,13  From: 12,10 
    View

    Pull stud for tool holder cone ISO 40 - Intermac, Pedrini, Cobalm and other - IMS

    Brand: IMS | Type: Bavelloni, Campagnola & Fedeli, Chiarini, Cobalm, Donatoni, Intermac, Noat, Pedrini, Scandinvent, Terzago
    Different options: verify stock
    Model:
    MVVE900
    Contact us to verify stock
    Model:
    MVIN900
    Contact us to verify stock
    Model:
    MVBA900SX
    Contact us to verify stock

    Tool Holder Cone for Stubbing Wheel ISO 40
    From: 231,13  From: 173,30 
    View

    Tool Holder Cone for Stubbing Wheel ISO 40 - Pedrini Cobalm and other - IMS

    Brand: IMS | Tool fitting: Flange - 6 bores M6 | Fitting: ISO 40 | Type: Bavelloni, Campagnola & Fedeli, Chiarini, Cobalm, Donatoni, Noat, Pedrini, Scandinvent, Terzago | Tool bore diameter: 50mm
    Different options: verify stock
    Model:
    MVBA126L
    Material:
    Stainless Steel "Endurance"
    Contact us to verify stock
    Model:
    MVBA126L
    Material:
    Black "Darkside"
    Contact us to verify stock
    Model:
    MVBA121C
    Material:
    Stainless Steel "Endurance"
    Contact us to verify stock

    Locking Kit tool holder cone for grinding wheels ISO 40
    From: 32,25  From: 24,20 
    View

    Locking Kit tool holder cone for grinding wheels ISO 40 - Breton, Cobalm and other - IMS

    Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw.
    Brand: IMS | Material: Stainless Steel | Tool bore diameter: 22mm, 35mm, 45mm | Type: Bavelloni, Brembana CMS Old Type, Breton, Busetti, Campagnola & Fedeli, Chiarini, Cobalm, DIN 69871/A, Donatoni, Gadia, Noat, Pavoni, Pedrini, Ravelli, Scandinvent, Terzago
    Different options: verify stock
    Model:
    M200
    Contact us to verify stock
    Model:
    M210
    Contact us to verify stock
    Model:
    M220
    Contact us to verify stock

    Tool Holder Cone for Grinding Wheel ISO 40
    From: 130,08  From: 97,60 
    View

    Tool Holder Cone for Grinding Wheel ISO 40 - Pedrini Cobalm and other - IMS

    In this video you can see an ISO 40 cone for Bavelloni, Pedrini and Cobalm machines - Model MVBA116I
    Brand: IMS | Tool fitting: Grinding wheel | Fitting: ISO 40 | Type: Bavelloni, Campagnola & Fedeli, Chiarini, Cobalm, Donatoni, Noat, Pedrini, Scandinvent, Terzago | Tool bore diameter: 22mm, 35mm, 45mm
    Different options: verify stock
    Model:
    MVBA125
    Material:
    Stainless Steel "Endurance"
    Contact us to verify stock
    Model:
    MVBA125
    Material:
    Black "Darkside"
    Contact us to verify stock
    Model:
    MVBA124
    Material:
    Stainless Steel "Endurance"
    Contact us to verify stock

    Tool holder fork ISO 50
    90,00  67,50  exc. VAT
    View

    Tool holder fork Donatoni ISO 50 – Plate reinforced - GNC

    Tool holder fork reinforced for automatic tool changer for CNC machine – INTERMAC ISO 50 – Plate reinforced, made by GNC. The tool fork is built in Mechanical Polyacetal (POM-C), reinforced with a stainless steel plate (AISI 304) to ensure a stronger holding force and a longer service life....
    Brand: GNC Meccanica | Fitting: ISO 50 | Machine brand: DONATONI
    Shipped within 3-5 days

    Tool holder fork Donatoni ISO 40 - Plate reinforced
    64,00  48,00  exc. VAT
    View

    Tool holder fork Donatoni ISO 40 - Plate reinforced - GNC

    Tool holder fork reinforced for automatic tool changer for CNC machine – INTERMAC ISO 40 – Plate reinforced, made by GNC. The tool fork is built in Mechanical Polyacetal (POM-C), reinforced with a stainless steel plate (AISI 304) to ensure a stronger holding force and a longer service life....
    Brand: GNC Meccanica | Fitting: ISO 40 | Machine brand: DONATONI
    Shipped within 3-5 days

    Tool holder fork ISO 50
    65,00  48,75  exc. VAT
    View

    Tool holder fork Donatoni ISO 50 - GNC

    Tool holder fork for automatic tool changer for CNC machine – Model DONATONI ISO 50, made by GNC. This tool fork is built in Mechanical Polyacetal (POM-C) specifically charged to ensure greater flexibility and a longer service life. The drive and the screws are AISI316. They are perfectly intercha...
    Brand: GNC Meccanica | Fitting: ISO 50 | Machine brand: DONATONI
    Shipped within 3-5 days

    Tool holder fork Donatoni ISO 40
    38,00  28,50  exc. VAT
    View

    Tool holder fork Donatoni ISO 40 - GNC

    Tool holder fork for automatic tool changer for CNC machine – Model DONATONI ISO 40, made by GNC. The tool fork is built in Mechanical Polyacetal (POM-C) specifically charged to ensure greater flexibility and a longer service life. The drive and the screws are AISI316. They are perfectly interchan...
    Brand: GNC Meccanica | Fitting: ISO 40 | Machine brand: DONATONI
    Shipped within 3-5 days