Grid View | List View
    GNC Pneumatic back stop
    $243,01 exc. VAT
    View

    Pneumatic Pin-Stop Locator / backstop for CNC

    Pneumatic locating device with a vacuum base. This pin stop locator allows getting an automatic positioning of the workpieces in the CNC table. Body frame in anodized aluminum Rectified Pneumatic Brass cylinder Stainless steel piston Striking pin plastic Viton seals for durabilit...
    Brand: GNC Meccanica | Use with: CNC
    Shipped within 5-10 days

    Pull stud for tool holder cone ISO50 - IMS
    From: $19,44 From: $14,58
    View

    Pull stud for tool holder cone ISO 50 - IMS

    Pull stud for tool holder cone ISO 50 Brembana CMS, Pedrini, Bidese, Biesse, 2T, D2, HSD and DIN 69871/A and Omag.
    Use with: CNC | Brand: IMS | Machine brand: 2T, Bidese, Biesse, Brembana CMS, D2, DIN 69871/A, HSD, Omag, Pedrini
    Variable product - view product to verify stock

    ER collet chuck holder cone ISO 50
    From: $288,98 From: $216,74
    View

    ER collet chuck holder cone 50 - OMAG 2T and other - IMS

    Tool holder cone 50 for CNC machines: 2T, Bidese, DIN 69871/A, Omag For example, all Omag Blade 5 Machines & Mill 4X CNC Router machines are built with ISO-50 spindles! Guaranteed to 8,000 hours. MASSIVE difference in stability from your typical ISO-40 spindles! This ISO50 tool holde...
    Tool fitting: Collet ER32, Collet ER40 | Use with: CNC | Brand: IMS | Machine brand: 2T, Bidese, DIN 69871/A, Omag
    Variable product - view product to verify stock

    Drill point holder cone ISO 50
    From: $225,73 From: $169,29
    View

    1/2 Gas drill point holder cone ISO 50 - Omag, SassoMeccanica and other - IMS

    Tool holder cone ISO 50 for CNC machines: 2T, Bidese, DIN 69871/A, Omag, SassoMeccanica
    Tool fitting: 1/2 Gas, M30 | Use with: CNC | Brand: IMS | Machine brand: 2T, Bidese, DIN 69871/A, Omag, Sassomeccanica
    Variable product - view product to verify stock

    Tool Holder Cone for Stubbing Wheels ISO 50
    From: $277,03 From: $207,78
    View

    Tool Holder Cone for Stubbing Wheels ISO 50 - Bidese 2T and other - IMS

    Tool holder cone ISO 50 for CNC machines: 2T, Bidese, DIN 6971/A, Omag
    Tool fitting: Flange - 6 bores M6 | Fitting: ISO 50 | Tool bore diameter: 22mm, 35mm, 45mm | Use with: CNC | Brand: IMS | Machine brand: 2T, Bidese, DIN 69871/A, Omag
    Variable product - view product to verify stock

    Tool Holder Cone for Grinding Wheel ISO 50
    From: $242,14 From: $181,61
    View

    Tool Holder Cone for Grinding Wheel ISO 50 - Bidese 2T and other - IMS

    Tool holder cone ISO 50 for machines: 2T, Bidese, DIN 69871/A, Omag
    Tool fitting: Grinding wheel | Fitting: ISO 50 | Tool bore diameter: 22mm, 35mm, 45mm, 50mm | Use with: CNC | Brand: IMS | Machine brand: 2T, Bidese, DIN 69871/A, Omag
    Variable product - view product to verify stock

    Pull stud for tool holder cone ISO/BT 40 - IMS
    From: $14,04 From: $10,53
    View

    Pull stud bolts ISO/BT 40 - IMS

    The pull stud bolt is the only part connecting the machining center and the tooling. It is one of the most important components because this one bolt retains the tooling and it must stand up to severe cutting forces. Because the pull stud is used under severe conditions it is regarded as a con...
    Use with: CNC | Brand: IMS | Machine brand: Achilli, Agut, BAVELLONI, BIMATECH, Brembana CMS new type, Brembana CMS old type, Breton, Busetti, Campagnola & Fedeli, Chiarini, COBALM, DENVER, DIN 69871/A, DONATONI, FA, Gadia, Helios, INTERMAC, Loffler, Lovati, Noat, Northwood, Omag, Park Industries, PAVONI, Pedrini, PRUSSIANI, ravelli, SCANDINVENT, Terzago, THIBAUT, VEM
    Variable product - view product to verify stock

    ER collet chuck holder cone ISO 40
    From: $386,05 From: $289,53
    View

    ER collet chuck holder cone ISO 40 - Omag - IMS

    Tool fitting: Collet ER32, Collet ER40 | Use with: CNC | Brand: IMS | Machine brand: Omag
    Variable product - view product to verify stock

    Drill point holder cone ISO 40
    From: $184,69 From: $138,51
    View

    1/2 Gas drill point holder cone ISO 40 - Omag - IMS

    Tool fitting: 1/2 Gas, M30 | Use with: CNC | Brand: IMS | Machine brand: Omag
    Variable product - view product to verify stock

    Tool Holder Cone for Stubbing Wheel ISO 40
    From: $256,51 From: $192,39
    View

    Tool Holder Cone for Stubbing Wheels ISO 40 - Omag - IMS

    Tool fitting: Flange - 6 bores M6 | Fitting: ISO 40 | Tool bore diameter: 50mm | Use with: CNC | Brand: IMS | Machine brand: Omag
    Variable product - view product to verify stock

    Tool Holder Cone for Grinding Wheel ISO 40
    From: $198,54 From: $148,90
    View

    Tool Holder Cone for Grinding Wheel ISO 40 - Omag - IMS

    Tool fitting: Grinding wheel | Fitting: ISO 40 | Tool bore diameter: 22mm, 35mm | Use with: CNC | Brand: IMS | Machine brand: Omag
    Variable product - view product to verify stock

    Locking Kit tool holder cone for grinding wheels
    From: $34,83 From: $26,13
    View

    Locking Kit tool holder cone for grinding wheels ISO 50 - Bidese 2T and other - IMS

    Locking kit tool holder cone ISO 50 for CNC machines: 2T, Bidese, DIN 69871/A, Omag
    Material: Stainless Steel | Tool bore diameter: 22mm, 35mm, 45mm | Use with: CNC | Brand: IMS | Machine brand: 2T, Bidese, DIN 69871/A, Omag
    Variable product - view product to verify stock

    Locking Kit tool holder cone for grinding wheels ISO 40
    $34,83 $26,13
    View

    Locking Kit tool holder cone for grinding wheels ISO 40 - Agut Prussiani and other - IMS

    Locking kit tool holder cone ISO 40 for machines: Agut, Brembana CMS, Lovati, Omag, Prussiani Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw.
    Material: Stainless Steel | Tool bore diameter: 22mm, 35mm | Use with: CNC | Brand: IMS | Machine brand: Agut, Brembana CMS new type, Lovati, Omag, PRUSSIANI
    Variable product - view product to verify stock