Showing 1–40 of 69 results

Brand
Use with

Tool holder Fork DIN 69871 ISO 50

48,75 67,50  Net of VAT
Tool holder fork DIN 69871 ISO 50 Tool holder fork (cone holder) for CNC machines with automatic tool change –

CNC suction cup foam gasket replacement seal

3,60 5,00  Net of VAT

The price and quantity of the product are stated per meter, meaning that the stated cost and amount apply to one meter of the product

Engraving CNC Suction Cups

248,10  Net of VAT
Engraving CNC Suction Cups These are special very low suction cups to use on CNC routers for engravings low relief

Tool holder fork HSK 63F HSD

22,50 28,50  Net of VAT
Tool holder fork HSK 63F – HSD model Tool holder fork for CNC machines with automatic tool change – model

Rectangular suction cup 250 x 500 mm

405,60  Net of VAT
250 x 500 mm (9.8 x 19.6 inch) rectangular suction cup (also called vacuum pods or vacuum cups) This is

Rectangular suction cup 100 x 500 mm

248,10  Net of VAT
Rectangular suction cup 100 x 500 mm (3 15/16 x  19 11/16 inches (also called vacuum pods or vacuum cups) Suction cup

Rectangular suction cup 50 x 200 mm

165,40  Net of VAT
50 x 200 mm (1 31/32 x 7 7/8 inch) rectangular suction cup Suction-cup features: Hand-assembled Made of Anodized aluminum High-grip hot-vulcanized

Rectangular suction cup 40 x 400 mm

190,60  Net of VAT
40 x 400 mm (1.57 x 15.75 inch) rectangular suction cup manufactured Suction-cup features: Hand-assembled Made of Anodized aluminum High-grip

Round suction cup Ø65 mm

91,40  Net of VAT
65-mm (2.56 inch) diameter round CNC suction cup (also known as vacuum pods or vacuum cups) 65-mm diameter round suction

Suction cup for CNC Router – Special H=30 mm

124,50 206,90  Net of VAT
GNC Suction Cup for “small CNC Router” with special height of 30 mm This suction cup is used to hold

Mechanical clamping system for CNC machine

45,00  Net of VAT
Mechanical clamping system for CNC machine The Mechanical Clamping System for CNC machines is a set of clamps designed to

Tool holder fork HSK Breton

42,40 58,40  Net of VAT
Tool holder fork for Breton with HSK 80 or HSK 100 tool holders Breton HSK80 / HSK100 Tool holder fork

Vacuum manifold – GNC

231,60 637,10  Net of VAT
Aluminum vacuum manifold An aluminum vacuum manifold is a device that is used to connect a vacuum pump to suction

Top / bottom spare suction plate – GNC

24,00 211,35  Net of VAT
GNC – Top/bottom spare suction plate unit If you damage the vacuum plate (top or bottom) of your suction cup

Suctioncup seal – GNC

1,75 41,80  Net of VAT
GNC – Suctiocup seal The suction cup seal is designed for use with double-vacuum suction cups, and it can

Pneumatic swing clamp stroke 40 mm

413,50  Net of VAT
Pneumatic swing clamp with stroke 40 mm for CNC working centers Mechanical clamp systems are real clamping plates. They are

Mechanical clamp – stroke 40 mm

165,40  Net of VAT
Mechanical clamp – stroke 40 mm Mechanical clamp for CNC working center. These clamps have a stroke of 40mm and

Suction cup retractable Ø200mm stroke 60 mm

413,50  Net of VAT
Suction cup retractable Ø200mm stroke 60 mm Thanks to the management of compressed air (in-out), this retractable suction cups cup

Pneumatic Pin-Stop Locator / backstop for CNC

248,10  Net of VAT
Pneumatic Pin-Stop Locator for CNC A Pneumatic Pin-Stop Locator, also known as a backstop, is a device that is used

Suction cup manifold 200×200 mm

248,10  Net of VAT
Suction cup manifold 200×200 mm The manifold suction cup encloses the advantages of a manifold distributor and a suction cup.

Pneumatic mushroom clamp stroke 60 mm

347,30  Net of VAT
Pneumatic mushroom clamp with 60 mm stroke Pneumatic clamp with piston 30mm diameter (the ring is 50mm). If you ed

Rollaway back stop stroke 48 mm

248,10  Net of VAT
Rollaway back stop stroke 48 mm Rollaway back stop are real automatic centering plates.  They are made of anodized aluminum

Breton locating device (flip stop)

124,50  Net of VAT
Locating device (flip stop) for Breton CNC If your Breton CNC is equipped with a slatted worktable you cannot use

Manual CNC pin stop locator

91,40  Net of VAT
Manual CNC Pin Stop Locators to easily locate your parts The manual location devices are used to place the workpieces

Tool holder fork Forvet ISO 40

30,00  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model FORVET ISO 40. This tool fork is built in

Tool holder fork P-CRUZ ISO 40

40,80  Net of VAT
Tool holder fork for PCRUZ CNC Machines Tool holder fork for automatic tool changer for CNC machine Model P-CRUZ ISO 40.

Tool holder fork Technology ISO 40 D2

32,00  Net of VAT
Tool holder fork ISO 40 D2 TECHNOLOGY Tool holder fork for automatic tool changer for CNC machine – Model TECHNOLOGY ISO

Tool holder fork Scandinvent ISO 40

40,80  Net of VAT
Tool holder fork Scandinvent ISO 40 Tool holder fork for automatic tool changer for CNC machine – Model Scandinvent ISO

Tool holder fork PAVONI ISO 40

59,20  Net of VAT
Tool holder fork PAVONI ISO 40 Tool holder fork for automatic tool changer for CNC machine – Model PAVONI ISO 40. The

Tool holder fork Poseidon ISO 40

23,80 51,00  Net of VAT
Tool holder fork Poseidon ISO 40 Tool holder fork for automatic tool changer for CNC machine – Model POSEIDON ISO 40. This

Tool holder fork Prussiani ISO 50

38,40  Net of VAT
Tool holder fork Prussiani ISO 50 Tool holder fork for automatic tool changer for CNC machine – Model PRUSSIANI ISO 50,

Tool holder fork Prussiani ISO 40

33,60  Net of VAT
Tool holder fork Prussiani ISO 40 Tool gripper for automatic tool changer for CNC machine PRUSSIANI ISO 40.  This tool fork

Tool holder fork GMM ISO 50

84,00  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model GMM ISO 50. This tool fork is built in

Tool holder fork GMM ISO 40

40,80  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model GMM ISO 40. This tool fork is built in

Tool holder fork Bavelloni BT 40

29,60 33,60  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model BAVELLONI MAS-BT 40 The tool fork is built

Tool holder fork BREMBANA CMS ISO 40

25,60 29,60  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model CMS-BREMBANA ISO 40 The tool fork is built

Tool holder fork Cobalm ISO 40 / BT 40

29,60  Net of VAT
Tool holder fork Cobalm ISO 40 / BT 40 The tool holder fork is an essential component for Cobalm CNC

Tool holder fork DIN 69871 / Donatoni ISO 50

55,20 76,00  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model DIN 69871 / DONATONI ISO 50 This tool

Tool holder fork Donatoni ISO 40

32,00 54,40  Net of VAT
Tool holder fork for automatic tool changer for CNC machine – Model DONATONI ISO 40 The tool fork is built

Tool holder fork CFM / Breton ISO 40

42,40  Net of VAT
Tool holder fork for CFM / Breton CNC machines ISO 40 Tool holder fork for automatic tool changer with ISO40