Round (ball nose) electroplated finger bit tip for marble
Ball nose finger bit tip ideal for carving on marble with CNC machines.
For CNC machines, you can use this 1/2 Gas > M10, M12, M14 adaptor or you can use this round electroplated head with the threaded finger bit.
If you are looking for the same model of this finger bit tip but without ball nose head, have a look at the Flat electroplated finger bit tip for marble.
This finger bit tip can be used also as a replacement for radial arm machines.
Technical specifications
| Ø | Useful Height | Fitting | Radius |
|---|---|---|---|
| 16 mm | 20 mm | M10 | 8 mm |
| 20 mm | 20 mm | M12 | 10 mm |
| 20 mm | 20 mm | M14 | 10 mm |
| 25 mm | 20 mm | M12 | 12,5 mm |
| 25 mm | 20 mm | M14 | 12,5 mm |
| 30 mm | 20 mm | M14 | 15 mm |
| 35 mm | 20 mm | M14 | 17,5 mm |
| 40 mm | 30 mm | M14 | 20 mm |
Working parameters
- RPM: 5000-6000
- Feed: 250-750 mm/min
This Round electroplated finger bit tip is available in two different versions:
- “Standard Line” used for working soft marbles;
- “Black Line” used for working hard and/or abrasive marbles
Reviews
There are no reviews yet.