Sale
Diamond blade for CNC machines - Marble cutting - Nicolai
Diamond blade for CNC machines - Marble cutting - Nicolai
Diamond blade for CNC machines - Marble cutting - Nicolai
Click to enlarge
Suction cup for CNC Router - Special H=30 mm
Suction cup for CNC Router - Special H=30 mm 124,50 € – 206,90 € Net of VAT
Back to products
Plastic Roller For Roller Conveyors
Plastic roller for roller conveyors 2,50 € – 10,00 € Net of VAT

Diamond blade for CNC machines – Marble cutting – Nicolai

138,40 € Net of VAT

In stock

COD: ADS00043 Category:
Description

Diamond blade for CNC machines and for marble cutting – Nicolai Diamant

Segmented diamond blade used on CNC machines, and numerical control machines, for cutting marble and soft materials.
The CNC blades (discs) are generally small in diameter (for example like this one of 200 mm diameter ) and thick to allow even transversal operations such as for example during trowel.
Thanks to its thickness of 3.6mm this CNC-blade can be used also on lathes.

Features of  the CNC diamond blade:

  • Diameter: 200 mm
  • Fitting bore: 30 mm
  • Standard steel core
  • N° of sectors: 24
    • Sector dimensions: 20 x 6 mm (L x H)
    • Sector thickness: 3.6 mm
Additional Info
Brand

Nicolai Diamant
Diameter

200 mm -7.9"
Core

Standard steel core
Fitting

Bore 30 mm
N° of sectors

24 mm
Use with

CNC
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Diamond blade for CNC machines – Marble cutting – Nicolai”

Your email address will not be published.

Request info

  1. 0 votes
    Q can you make cnc horizontal blades for granite cutting ? can you provide tool holder attachment for horizontal blade ? can you make different diamter blade other than 200mm ? answer now
    Asked by SAMEER PATEL on February 7, 2022 2:45 pm
    Answered by the admin

    Hi,
    yes, We can make the horizontal blade as you need. Which diameter?
    About the tool-holder, we can supply also the tool-holder for the CNC Blades, no problem. Please send me a photo of the tool holders you already have and a photo of its pull stud
  2. 0 votes
    Q hello It's me Piotr again. Unfortunately, I can't send you a technical photo, because I can't paste it, I need an email. Prisoner, you can be very thankful. Peter
    Asked by Piotr Golinski on April 13, 2021 11:57 am
    There are no answers for this question yet. Answer now
  3. 0 votes
    Q The material to be cut is similar to concrete, but the outside is painted with white Acryl. We also want the cutting edge to be free of acrylic chips. Cut horizontally, what is the cost of the saw and if possible, how long will it be for daily cutting Fastened to the CNC chuck with four screws, SHK-63F chuck, the saw must have four holes. Please provide your e-mail as I cannot send the schematic Regards
    Asked by Piotr Golinski on April 12, 2021 3:05 pm
    There are no answers for this question yet. Answer now
  4. 0 votes
    Q Hello looking for a cutting saw for CNC. Must have four mounting holes for HSK-63 F CNC chuck. Average saw is 230mm or 250mm center hole 30mm. The material to be cut is similar to concrete and the outer surface is gelcoat. REGARDS answer now
    Asked by Piotr Golinski on April 12, 2021 12:33 pm
    Answered by the admin

    Hi Piotr, 
    Yes, we can produce the CNC blade as you need you. 
    Do you want to use it horizontally or vertically?
    Do you have the aggregate to install the blade?
    Diameter 250, Hole 30mm, 4 mounting holes ( I need to know diameter and distances)

     

Send me a notification for each new answer.