CNC Electroplated finger bit for Marble cutting
When you need to cut and profile marble or soft-stone with your CNC machine you have to use an electroplated finger bit.
This electroplated tool is available in 3 diameters 16, 20 and 25 mm. The Useful height is up to 120 mm.
The fitting for the spindle is 1/2′ gas
This is a made in Italy finger bit for marble, high-quality tool for high-quality performance.
Suggested working parameters to use the electroplated finger bit in your CNC Machine:
- Rpm: 4800 – 5500
- Feed: 250 – 500 mm/min
The video below shows 3 components:
- Electroplated finger bit for Marble with diameter 20 mm and useful height 40 mm
- Tool holder fork Intermac ISO 30
- 1/2 Gas drill point holder cone ISO 30 Intermac
| CODE LIST | |||
|---|---|---|---|
| Cod: FC16WF100GP1 |
Useful height: 100 mm | Cod: FC18WF70GP1 |
Useful height: 70 mm |
| Cod: FC16WF30GP1 |
Useful height: 30 mm | Cod: FC16WF40GP1 |
Useful height: 40 mm |
| Cod: FC16WF50GP1 |
Useful height: 50 mm | Cod: FC16WF60GP1 |
Useful height: 60 mm |
| Cod: FC16WF70GP1 |
Useful height: 70 mm | Cod: FC16WF80GP1 |
Useful height: 80 mm |
| Cod: FC20WF90GP1 |
Useful height: 90 mm | Cod: FC20WF30GP1 |
Useful height: 30 mm |
| Cod: FC20WF40GP1 |
Useful height: 40 mm | Cod: FC20WF50GP1 |
Useful height: 50 mm |
| Cod: FC20WF60GP1 |
Useful height: 60 mm | Cod: FC20WF70GP1 |
Useful height: 70 mm |
| Cod: FC20WF80GP1 |
Useful height: 80 mm | Cod: FC20WF100GP1 |
Useful height: 100 mm |
| Cod: FC25WF80GP1 |
Useful height: 80 mm | ||
Reviews
There are no reviews yet.