CNC Glass cutting finger bits – Diamut
Glass cutting finger bit for CNC and vertical machines.
Available in different diameters from 6 mm up to 20 mm.
It is possible to select the different cutters in 2 binder versions:
- High durability (Glass cutting hard binder)
- High finish (Glass cutting soft binder)
In this way, depending on the case, you have the opportunity to choose the best compromise between tool life and the quality of the finish.
In the table below you will find the suggested parameters to be used with these finger bits for glass:
| D | L1 | Z | GRIT | BOND | TYPE | RPM | FEED mm/min | CODE |
|---|---|---|---|---|---|---|---|---|
| 6 | 20 | 3 | D301 | DMV/400 | High finishing | 8500-10000 | 200-300 | DFR00344 |
| 8 | 27 | 3 | D301 | DMV/400 | High finishing | 8500-10000 | 200-300 | DFR00237 |
| 8 | 27 | 3 | D301 | DFG.1 | Long life | 8500-10000 | 200-300 | DFR05016 |
| 10 | 27 | 3 | D301 | DFG.1 | Long life | 12000-12500 | 250-400 | DFR05015 |
| 10 | 27 | 3 | D252 | DFG.1 | High finishing | 12000-12500 | 200-250 | DFR05017 |
| 10 | 27 | 3 | D151 | DFG.1 | High finishing | 12000-12500 | 100-130 | DFR06349 |
| 10 | 27 | 4 | D213 | DMV/600 | High finishing | 12000-12500 | 250-500 | DFR02900 |
| 14 | 40 | 4 | D301 | DMV/400 | High finishing | 12000-12500 | 400-600 | DFR02159 |
| 14 | 40 | 4 | D301 | DFG.1 | Long life | 12000-12500 | 400-600 | DFR05019 |
| 16 | 40 | 4 | D301 | DMV/400 | High finishing | 12000-12500 | 400-600 | DFR05005 |
| 16 | 40 | 4 | D301 | DFG.1 | Long life | 12000-12500 | 400-600 | DFR04968 |
| 20 | 40 | 4 | D252 | DMV/400 | High finishing | 12000-12500 | 700-1000 | DFR02567 |
| 20 | 40 | 4 | D301 | DMV/400 | High finishing | 12000-12500 | 600-1000 | DFR00202 |
| 20 | 40 | 6 | D301 | DMV/400 | High finishing | 12000-12500 | 600-1000 | DFR00152 |
| 20 | 40 | 6 | D301 | DFG.5 | Long life | 12000-12500 | 600-800 | DFR01911 |
| 22 | 45 | 7 | D252 | DMV/700 | High finishing | 12000-12500 | 700-1000 | DFR07240 |
Reviews
There are no reviews yet.