High-speed REINFORCED ceramic cutting blade “Faster PRO” Ø400 mm (16”) – Diatex
SUITABLE FOR MITER CUT
FASTER PRO is the reinforced steel core diamond blade developed for high-speed cutting, and miter cutting of large ceramic slabs
- Suitable for miter cut
- Minimum cutting feed speed 1.5 meter/minute
- 10% cutting speed reducing in input and output
- Suitable for slab thicknesses from 10mm up to 20 mm
- Sharp the segments after cutting 100 linear meters (Sharpening bar)
- Wet use
- Suitable for all ceramic surfaces
- 410 diameter
- Diamond segments: 3,2 x 10
- Standard hole 60mm with ring for 50mm fittings
The product is available in 400 mm with a central bore of 60 mm and reduction to 50 mm (the disc is also available on request with a different central hole and/or with the addition of additional dragging holes, just indicate it in the order notes or by writing to us).
FASTER PRO is ideal for cutting all ceramic materials such as Laminam, Neolith, Dekton, Lapitec, Infinity, Sapienstone, Atlas Plan, Abk Stone-MATERIA, Italstone, Rak slabs, GEOLUXE, and many others.
Recommended operating parameters for Faster blades (same for all materials)
| Tile thickness | RPM Ø400 | Feed speed LM/min | Feed speed 45° LM/min |
|---|---|---|---|
| 6/9 mm | 2500-2700 | 2.0-2.4 | 1.3-1.6 |
| 10/12 mm | 2500-2700 | 1.7-2.2 | 1.0-1.3 |
| 13/20 mm | 2500-2700 | 1.5-2.0 | 0.8-1.0 |
Diatex’s suggestions for using “Faster PRO” discs for fast cuts:
- Recommended for 45° cutting at high speed
- Single-pass cutting
- Minimum cutting speed 1.5 linear meters/minute
Reviews
There are no reviews yet.