Incremental shaft encoders

This series has been designed for industrial and professional uses where minimum size is required without affecting technical performances.

• External metal casing
• Made with stainless steel shaft and precision bearings
• Good protection to environmental conditions (dust, oil, moisture)
•  LED light source with 100.000 hours MTBF (Mean Time Between Failure)
• “Push-pull” connection of detecting phototransistors
• Number of pulses/rev. from 1 to 5.000 (varies from model to model)

Accurate design engineering and extended at high and low temperatures assure high reliability.

This series of incremental encoders has been for industrial and professional uses where high technical performance is required.

• External metal casing
• Made with stainless steel shaft and precision bearings
• Good protection to environmental conditions (dust, oil, moisture)
• LED light source with 100.000 hours MTBF (Mean Time Between Failure)
• “Push-pull” connection of detecting phototransistors
• Number of pulses/rev. from 1 to 20.000 (varies from model to model)

Accurate design engineering and extended at high and low temperatures assure high reliability.

This series of incremental encoders has been designed for use in hard environmental condition as on textile machines, machine tools, rolling mills, tanning industry, marble,wood and concrete machining.

• External metal casing
• *Made with stainless steel shaft and precision bearings
• Excellent protection to environmental conditions (dust, oil, moisture)
• LED light source with 100.000 hours MTBF (Mean Time Between Failure)
• “Push-pull” connection of detecting phototransistors
• Number of pulses/rev. from 1 to 20.000 (varies from model to model)

Accurate design engineering and extended at high and low temperatures assure high reliability.

*The high size of the shaft, the bearings and the mechanical part allow a this type of encoder the direct mounting of sprockets, pulleys, toothed belts, metric wheels, ecc.

This series of “high resolution” incremental encoders is used in the dividers and angular positioners.

• High operating frequency (up to 1 MHz)
• Number of pulses/rev. from 1 to 90.000 (varies from model to model)
• The pass-through encoders are supplied with an inner self-adjusting coupling

This series of incremental encoders has been for industrial and professional uses where high technical performance is required.
This encoders are equipped with an internal special coupling allowing for compensation of both axial and radial slack of the motor shaft to which they are coupled.

• Many motor manufacturers standardized the fitting of these encoders on their motors. “Available several fitting flanges”
• On request it is possible to make a “customized” flange
• Number of pulses/rev. from 1 to 20.000 (varies from model to model)

This series of transducers has been designed for those processes having the need of simultaneous information supplied by encoder and tachogenerator.

• An incremental encoder and a tachogenerator are housed in a single unit
• The tachogenerator model and manufacturer are at customer’s choose
• LED light source with 100.000 hours MTBF (Mean Time Between Failure)
• “Push-pull” connection of detecting phototransistors
• Excellent protection to environmental conditions (dust, oil, moisture)
• Number of pulses/rev. from 1 to 3.600 (varies from model to model)

On request it’s possible to match a centrifugal relay to the tacho generator unit.

This series of transducers has been designed to measure linear displacements using the “pinion/rack” method. There are different types of pinion-encoders: with and without the pinion pre-charge device.

• Resolution range from 1 mm to 1 micron
• LED light source with 100.000 hours MTBF (Mean Time Between Failure)
• “Push-pull” connection of detecting phototransistors
• Made with stainless steel shaft and precision bearings
• Good protection to environmental conditions (dust, oil, moisture)

Accurate design engineering and extended at high and low temperatures assure high reliability.

This series of incremental encoders “special” is a small selection among the number of existing models, including encoders with throught-shaft, encoders for engine test rooms, encoder with stainless steel container, encoders with double shaft, encoders for balances, encoders with metric wheels for continuous cut machines, ecc.

• All the special series is made of metal
• Made with stainless steel shaft and precision bearings
• LED light source with 100.000 hours MTBF (Mean Time Between Failure)
• “Push-pull” connection of detecting phototransistors
• Number of pulses/rev. from 1 to 20.000 (varies from model to model)

Accurate design engineering and extended at high and low temperatures assure high reliability.

This “low cost” series differs from the other series for their highly reliable characteristics to an low price. The number of pulses/rev. is from 1 to 1.024 (varies from model to model).

This series of transducers they are used for those processes that simultaneously or alternatively require information from two incremental encoders set in a same container. Number of pulses/rev. from 1 to 90.000 (varies from model to model).

Thanks to the certifications ATEX II 2 G Ex d II C T6 / T5 Gb e ATEX II 2 D Ex tb IIIC T85°C / T100°C Db IP6X, according to CENELEC rules and CESI obtained from the Belgian ISSeP institute in Liège, this series of incremental encoders can be used in working environments with explosive atmosphere due to gas and / or dust (except for mines with grisù).

• Made with stainless steel shaft and precision bearings
• The models are extremely sturdy