Polycrystalline PCD Router Bit – Amastone
Polycrystalline diamond (PCD) bits are ideal to engrave granite, quartz, and lava stone on CNC machines and CNC routers.
Cylindrical shank: 10mm dia
Bored for the inner water flow
Recommended operating parameters:
- 7000/8000 rpm
- Feed rate: 200/250 mm per minute
- Max plunge depth 2 mm
- Plunge rate (the rate at which the cutter is moved vertically into the material or during ramping moves): 50 mm/min – 20% of the feed rate
- We recommend ramp movent for stone penetration
- We recommend both internal and external water.
Polycrystalline bits category