Solid Carbide up & downcut Spiral Bits – CMT
CMT Cutter for woodworking, made with a super-micrograin carbide formulation.
The new low-angle spiral offers a wide variety of applications, such as Laminates, Plastic materials, Hardwoods and other woods.
The Upcut and Downcut spiral bits provide an excellent finish on both the upper and the lower side of the workpiece.
Upward chip ejection.
| DIAMETER (D) | USEFUL HEIGHT (I) | Cutting height (I1) | TOTAL LENGTH (L) | CYLINDRICAL FITTING (S) | N° CUTTING EDGES (Z) | CODE |
|---|---|---|---|---|---|---|
| 4 mm | 15 mm | 7 mm | 50 mm | 4 mm | 1+1 | 190.040.11 |
| 5 mm | 22 mm | 8 mm | 60 mm | 5 mm | 1+1 | 190.050.11 |
| 6 mm | 22 mm | 8 mm | 60 mm | 6 mm | 1+1 | 190.060.11 |
| 8 mm | 32 mm | 7 mm | 80 mm | 8 mm | 2+2 | 190.080.11 |
| 9,52 mm | 28,6 mm | 7 mm | 76,2 mm | 9,52 mm | 2+2 | 190.504.11 |
| 10 mm | 32 mm | 7 mm | 80 mm | 10 mm | 2+2 | 190.100.11 |
| 10 mm | 42 mm | 7 mm | 90 mm | 10 mm | 2+2 | 190.101.11 |
| 12 mm | 42 mm | 7 mm | 90 mm | 12 mm | 2+2 | 190.120.11 |
| 12 mm | 52 mm | 7 mm | 100 mm | 12 mm | 2+2 | 190.121.11 |
| 12,7 mm | 25,4 mm | 16 mm | 76,2 mm | 12,7 mm | 2+2 | 190.505.11 |
| 12,7 mm | 28.6 mm | 16 mm | 76,2 mm | 12,7 mm | 2+2 | 190.506.11 |
| 12,7 mm | 34,9 mm | 16 mm | 88,9 mm | 12,7 mm | 2+2 | 190.507.11 |
| 12,7 mm | 41,3 mm | 16 mm | 101,6 mm | 12,7 mm | 2+2 | 190.508.11 |
| 16 mm | 55 mm | 24 mm | 110 mm | 16 mm | 2+2 | 190.160.11 |
| 18 mm | 55 mm | 30 mm | 110 mm | 18 mm | 2+2 | 190.180.11 |
Reviews
There are no reviews yet.