CNC Tooling
Diamond Blades
Angle Grinder Tools
In-line Machine Tools
Texture tooling
Surface treatment
Adhesives
Drill bits
Stone carving tools
Diamond Wires and Belts
Cemetery accessories
CNC Suction Cups
CNC Tool Holders
CNC Tool Forks
Positioning Alignment Lasers
Material Handling
Machinery
Spare parts
Electrical products
Personal Protective Equipment
130-mm diameter (5.12 inch) round CNC suction cup manufactured by GNC (also known as vacuum pods or vacuum cups)
Suction-cup features:
- Hand-assembled
- Made of Anodized aluminum
- High-grip hot-vulcanized rubber pads
- Modular system
- Fast-connect vacuum-tube fitting
- Top pad and gasket made of stain-proof rubber with vinyl-carbon look
- Stainless steel screws
- Water-repellent stain-proof carbon-look column
- Height tolerance ± 0.02 mm
Circular anodized aluminum suction cup set with diameter 130 mm; the top pad (on which the piece rests) is made of hot-vulcanized EPDM rubber.
EPDM rubber has a very strong grip and forms a tight seal to preclude any risk of the piece moving.
The unit has a fast-connect tube fitting to create the vacuum.
The screws are made of stainless steel to prevent rusting, as they are for the other suction cups on our site. Height tolerances ± 0.02 mm.
Watch the video below for a more detailed look at our 130mm diameter cup.
If the bottom plate (base) is configured with an O-ring or a mechanical hold-down, the base diameter is 150 mm.
The top plate is made of EPDM rubber with a diameter is 130 mm.
| VACUUM AREA (mm²) |
HOLDING FORCE (N) |
FLOW RATE (m³/h) |
CONSUMPTION (l/min) |
|---|---|---|---|
| 9500 | 790 | 1.20 | 16.6 |
If your CNC Brand is not listed in the dropdown menu above, choose the “CNC brand not listed” option. If you choose a non-standard intermediate height, it may take a few days longer than expected to manufacture the suction cup.
Video for round Ø130 mm suction cup:
Related spare parts:
Round suction-cup spare parts
J. H. Z. (verified owner) –
I jus recieved the cups and seem to work good. Minor detail, have a red and blue socket to differ between upper and lower part of the cup.