70 x 150 mm (2.76 x 5.91 inch) rectangular suction cup (also known as vacuum cups or vacuum pods) manufactured by
- Modular system
- Made of Anodized aluminum
- High-grip hot-vulcanized rubber pads
- Fast-connect vacuum-tube fitting
- Top pad and gasket made of stain-proof rubber
- Stainless steel screws
- Columns coated with water-repellent, carbon-look, easy to wash vinyl protection
- Height tolerance ± 0.02 mm
Rectangular suction cup 70× 150 mm for CNC machines
Rectangular anodized aluminum suction cup set of size 70 x 150 mm; the top pad (on which the piece rests) is made of hot-vulcanized EPDM rubber.
EPDM rubber creates a strong grip and a tight seal to prevent the workpiece from piece moving.
The unit has a fast-connect tube fitting to create the vacuum.
The screws are stainless steel to prevent rusting, which holds true for the other suction cups available on our site. Dimensional tolerances are 0.02 mm.
These small rectangular suction cups (also called “anti-vibration pads“) are used as “support pads”; although they lack the strength to hold the workpiece, they increase stability, all the same. They are very narrow and can be positioned in small areas that, otherwise, would remain without support.
If the CNC Brand is not listed in the dropdown menu above, choose the “CNC brand not listed” option. If you choose a non-standard intermediate height, it may take a few days longer than expected to manufacture the suction cup.
Related spare parts
Spare parts for rectangular suction cups