Two-component Joint adhesive – Kongder

Two-component Joint adhesive – Kongder

Pure Acrylic Solid Surface Adhesive Seamless Joint Glue – Ceramic, Stone, Marble, Granite, Engineered Stone Adhesive – 490ml Joint Adhesive

It’s a 2-component Solid surface Adhesive (Glue+ Hardener) to get the perfect seamless joint effect.

Seamless joint, high bond strength, solid surface adhesive, invisible seam joint glue for granite, marble, quartz stone, porcelain, ceramic, and natural stone surface.
Colors available: Marazzi Saint Laurent, Marazzi White

How to use Kongder Joint adhesive:

1. Polish the joint edges with a 600-grit sandpaper
2. Prepare the adhesive, dispenser, and mixer
   • Install the dispenser, place the cartridge in the dispenser and take off the stopper
   • Gently pull the dispenser trigger until the adhesive and hardener outflow at the same time.
   • Attach the mixer
   • Purge about 2g glue to ensure that both components are present
3. Apply the glue on the joint edges
4. Fix the joint edges and install the clamps
5. Wait 18-22 minutes at 24 °C/75.2 °F
6. Make sure the glue has cured completely
7. Polish to remove the glue and get the seamless joint effect

You may be interested also in:

Dispenser for Kogder Adhesive 490mm

Seamless joint, high bond strength solid surface adhesive video