Two-component poliepoxy colored glue Marpoxy – Royal

Two-component poliepoxy colored glue Marpoxy – Royal

Fast-curing high-viscosity filled epoxy mastic. High hardness and excellent chemical-mechanical resistance.
Marpoxy is Suggested for mixed gluing including honeycomb (on metal it is advisable to sand the surface before gluing).
The colors available are white, black, and beige.

If you need you can color it using the coloring pastes;  color only part A before mixing the product.

How to use Marpoxy:

To use the product, it is important to follow some simple instructions. Firstly, make sure the surface is clean, dry, and free of dust, grease or wax. Then, take the necessary quantity of both components and mix them in a 1:1 ratio. It is important to keep the resin (part A) and the hardener (part B) in their original containers and avoid contact with metal parts that may rust.

During bonding, avoid using PVC and use only anti-corrosion plastics. Also, do not mix the product with dirty tools. We recommend a bonding thickness between 3.0 and 2.5 mm. To color the product, use coloring pastes and only color part A before mixing the product.

After use, close the containers tightly and store the product in a warehouse away from the sun. With these simple instructions, the high-viscosity loaded epoxy putty can be used safely and effectively for any mixed bonding application.

• Part A: 1.6 – 1.8 kg/lt
• Part B: 1.8 – 2.0 kg/lt
• Ratio mix by weight: 100 + 50
• Gel time at 25°C: 10 – 15min
• Curing time at 25°C: 1 h – 1 h 3 0 min
• Minimum reaction temperature: + 10°C
• Working time at 25°C: 24 h