V-Grooving Router Bits 90° for Woodworking – CMT
These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Like all CMT bits, they are made of super strength Fatigue Proof® steel with carbide-tipped cutting edges and are coated with our trademark orange PTFE non-stick coating. These bits are ideal for routing signs, or almost any project that is suitable for accurate template routing.
| DIAMETER (D) | USEFUL HEIGHT (I) | Angle (A) | TOTAL LENGTH (L) | CYLINDRICAL FITTING (S) | Code |
|---|---|---|---|---|---|
| 6 mm | 8 mm | 90° | 38.1 mm | 6 mm | 715.060.11 |
| 6 mm | 8 mm | 90° | 38.1 mm | 8 mm | 915.060.11 |
| 6.35 mm | 8 mm | 90° | 38.1 mm | 6.35 mm | 815.064.11 |
| 9.5 mm | 12.7 mm | 90° | 44.5 mm | 6 mm | 715.095.11 |
| 9.5 mm | 12.7 mm | 90° | 44.5 mm | 6.35 mm | 815.095.11 |
| 9.5 mm | 12.7 mm | 90° | 44.5 mm | 8 mm | 915.095.11 |
| 12.7 mm | 12.7 mm | 90° | 44.5 mm | 6 mm | 715.127.11 |
| 12.7 mm | 12.7 mm | 90° | 44.5 mm | 6.35 mm | 815.127.11 |
| 12.7 mm | 12.7 mm | 90° | 44.5 mm | 8 mm | 915.127.11 |
| 16 mm | 12.7 mm | 90° | 52.8 mm | 8 mm | 915.160.11 |
| 16 mm | 12.7 mm | 90° | 63.5 mm | 12 mm | 915.660.11 |
| 16 mm | 12.7 mm | 90° | 63.5 mm | 12.7 mm | 815.660.11 |
| 19 mm | 16 mm | 90° | 55.5 mm | 6 mm | 715.190.11 |
| 19 mm | 16 mm | 90° | 63.5 mm | 12 mm | 915.690.11 |
| 19 mm | 16 mm | 90° | 63.5 mm | 12.7 mm | 815.690.11 |
| 31.7 mm | 19 mm | 90° | 63.5 mm | 8 mm | 915.317.11 |
| 31.7 mm | 19 mm | 90° | 63.5 mm | 12 mm | 915.817.11 |
| 31.7 mm | 19 mm | 90° | 63.5 mm | 12.7 mm | 815.817.11 |
| 38 mm | 28.5 mm | 90° | 63.5 mm | 8 mm | 915.380.11 |
| 38 mm | 28.5 mm | 90° | 70 mm | 12.7 mm | 815.880.11 |
Reviews
There are no reviews yet.