Water-based stain-resistant for unpolished surfaces FilaW68- Fila

Water-based stain-resistant for unpolished surfaces FilaW68

FilaW68 is a stain-proofing water-based, it is ideal for unpolished surfaces, such as terracotta, quarry tiles, and concrete. This product is available in 5-liter can or 1-liter cans.

The protective stain-proofing FilaW68 is the FILA GREEN LINE product, which includes all products with a low environmental impact.

What’s it for?

• Seals and protects porous materials such as rough-finish natural stone, terracotta, and cement from oily dirt.
• Drastically reduces absorption without affecting the material\’s natural look.
• Suitable for interior and exterior surfaces.
• For use on interior floors as a protective base-coat before the application of wax.
• Scratch-resistant: by protecting the surface, scratches can be removed easily during the cleaning process.

Advantages:

• Natural finish: does not alter the appearance
• It is a water-based product and so it more environmentally friendly. It drastically reduces treatment time as it can be applied to surfaces still not completely dry.
• Does not form a surface film
• Does not alter terracotta frost resistance
• Excellent also for concrete surfaces
• The product is certified food-safe
• This product has extremely low VOC emissions: certified by GEV and marked by EC1PLUS and helps towards gaining credits for the leed

Method of use:

No dilution required: ready to use.

Indoor surfaces in terracotta and untreated stone:

1. On a clean and dry surface, apply one coat of FILAW68, evenly, using a paintbrush or fleece pad, also soaking the joints well.
2. Wait 4 hours, then apply a coat of FILAJET.
3. Wait at least an hour, then apply a coat of the specific finishing wax for the effect desired (FILAMATT: natural, FILASATIN: satin, FILACLASSIC, and FILALONGLIFE: glossy).

Internal surfaces in terracotta and polished stone:

1. On a clean and dry surface, apply one coat of FILAW68, evenly, using a paintbrush or fleece pad, also soaking the joints well.
2. Wait 4 hours and then, apply a coat of the specific finishing wax for the effect desired (FILAMATT: natural, FILASATIN: satin, FILACLASSIC, and FILALONGLIFE: glossy).

Outdoor surfaces in terracotta, stone, and concrete:

1. On a clean surface, apply 2 coats of FILAW68 evenly, using a paintbrush or fleece pad, also soaking the joints well. Maintenance: diluted solution of FILACLEANER.