Name: Scissor lifting clamp "R" series - Weha
Brand: Weha
Availability: PreOrder

Scissor lifting clamp “R” series – Weha

379,90 € – 1.299,00 €

Weha – Scissor lifting clamp “R” series

These scissor lifters can lift full slabs of granite, marble, engineered stone, quartz, etc without any problem.

The plates are rubber coated to prevent damage and scratches on the slabs.

This type of lifting clamp is available in 3 different models:

Model R400 for max capacity 400 Kg
Model R400-Twin for max capacity 800 Kg
Model R1000 for max capacity 1000 Kg
Model R1500 Jumbo2 capacity 1500 kg (clamp range 510 – 965 mm)

R15000 Jumbo 2 Slab Grab Scissor Lifter (monument lifter)

Load Capacity: 1500 kg (3300 lbs)
Height when Closed: 50 cm (20″)
Height When Open: 127 cm (50″)
Slab Thickness (Grip Width): 500 – 950 mm (20″-38″)
Weight: 53 kg (93 lbs)
Pad Size: 200 x 200 mm (8″ x 8″)

IMPORTANT SAFETY NOTICE: These Scissor lifting clamps are designed to lift only one slab at a time. Lifting multiple slabs constitutes an unsafe condition, which can cause injury.

IMPORTANT SAFETY TIP: Select the proper size clamp for the job. Determine the slab weight to be lifted and the slab thickness (it must be within the grip range).

Brand

Weha

Capacity

400 Kg

800 Kg

1.000 Kg

1.500 Kg

Clamp range

20 – 80 mm

25 – 200 mm

500 – 950 mm

Back to products

Select your option

Model	R1500 - Jumbo2 R400 - 400 Kg R400 Twin - 800 Kg R1000 - 1000 Kg
	Clear selection

SKU: N/A Category: Material Handling

Description

Additional Info

Brand	Weha
Capacity	400 Kg , 800 Kg , 1.000 Kg , 1.500 Kg
Clamp range	20 – 80 mm , 25 – 200 mm , 500 – 950 mm

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Scissor lifting clamp “R” series – Weha”

Request info

hi wega , i do you have some handeling equipment to handle steel pipes also?

0 votes

Q hi wega , i do you have some handeling equipment to handle steel pipes also? answer now
Asked by Sunil Swaminathan on April 13, 2023 1:28 pm

Answered by the admin
hello,
yes we have this lifting clamp for pipes: Pipe Lifting clamp – PZTU
Let me know if it meets your needs.

Hi, we are after lifting concrete kerbs 125mm width, 250mm depth and 900mm long. Which do you advise is the best clamp to use thankyou

0 votes

Q Hi, we are after lifting concrete kerbs 125mm width, 250mm depth and 900mm long. Which do you advise is the best clamp to use thankyou answer now
Asked by LBP on January 11, 2022 11:42 am

Answered by the admin
Hello,
if you can clamp your concrete kerbs from the 125mm side you can use the R1000 model lifting clamp because it has a claw width up to 200mm.
Select the model "R1000 - 1000Kg" and add it to the cart.
For further information do not hesitate to contact us again.

Scissor lifting clamp “R” series – 800 Kg – Weha We wuould like to buy 2 pices because we want to lift laminated glass for pool. Is it suitable for glass lifting?

0 votes

Q Scissor lifting clamp “R” series – 800 Kg – Weha We wuould like to buy 2 pices because we want to lift laminated glass for pool. Is it suitable for glass lifting? answer now
Asked by Robert Gojković on June 30, 2021 11:55 am

Answered by the admin
Hello Robert,
yes, these lifting clamps are suitable for glass also.
Take care

You have said that this clamp can lay a slab from vertical to horizontal. It surely cannot do this as it will lose grip . It will lift vertically only surely ..?

0 votes

Q You have said that this clamp can lay a slab from vertical to horizontal. It surely cannot do this as it will lose grip . It will lift vertically only surely ..? answer now
Asked by Gerry on May 3, 2021 2:53 am

A
hello Garry,
yes, you are right, the R series can not do that.
Therefore it’s better to use the Riba series with the cables:
https://amastone.com/shop/weha-scissor-lifting-clamp-riba-series-500-1200-1400-kg/

Looking to grab concrete panels to slot into concrete H posts. Dimensions of them are 1ft by roughly 6ft the thickness is 20mm . There to be grabbed by a machine and placed in. What are the dimensions of the rubbers and will the r400 grab it safely , and stay grabbed while tracking or slewing around with the machine ?

0 votes

Q Looking to grab concrete panels to slot into concrete H posts. Dimensions of them are 1ft by roughly 6ft the thickness is 20mm . There to be grabbed by a machine and placed in. What are the dimensions of the rubbers and will the r400 grab it safely , and stay grabbed while tracking or slewing around with the machine ? answer now
Asked by Alan Horgan on January 10, 2021 10:34 pm

Answered by the admin
Hi Alan,
your slabs are 1ft X 6ft (30 x 180 cm)
The surface of the Clamp R400 is 15 x 10 cm. So you can use it for slabs up to 400 kg.
The thickness of the slabs must be 20mm or higher.
Do you need to move slabs from a vertical to a horizontal position?
If you need to do it this R series clamp cannot do that.
Therefore it’s better to use the Riba series with the cables: https://amastone.com/shop/weha-scissor-lifting-clamp-riba-series-500-1200-1400-kg/

The R400 twin looks heavier duty than the R1000 do y’all have a twin in the R1000 and what is the depth of the throat of the scissor

0 votes

Q The R400 twin looks heavier duty than the R1000 do y’all have a twin in the R1000 and what is the depth of the throat of the scissor answer now
Asked by Walt Guettler on October 23, 2019 8:18 pm

Answered by the admin do you mean Claw width: 25 – 200 mm Claw surface: 200×200 mm

Do you have any other suggestions for picking up slabs that are 4 inches thick 16 foot long 30 inches wide approximately 600 to 800 pounds each. I don’t want to mess up the surface of the slabs because they are going to be used for tables any help would be greatly appreciated.

0 votes

Q Do you have any other suggestions for picking up slabs that are 4 inches thick 16 foot long 30 inches wide approximately 600 to 800 pounds each. I don’t want to mess up the surface of the slabs because they are going to be used for tables any help would be greatly appreciated.
Asked by Walt Guettler on October 23, 2019 11:22 am

There are no answers for this question yet. Answer now

The R400 twin looks much heavier duty than the R1000. do you offer the R1000 clamp in a twin. What is the claw surface of the R 1000 and the depth of the throat. How far out are you to have one delivered to FL 32428 area code.

0 votes

Q The R400 twin looks much heavier duty than the R1000. do you offer the R1000 clamp in a twin. What is the claw surface of the R 1000 and the depth of the throat. How far out are you to have one delivered to FL 32428 area code. answer now
Asked by Walt Guettler on October 23, 2019 11:18 am

Answered by the admin
Hi, the R1000 clamp is available online in a single gripping surface and the area is 200x200 mm:
We dispatch the clamp in 4 days and it takes 3 days to reach the USA Florida

Could this be used to clamp onto wood slabs cut out of logs and pick them up. And is that US dollars

0 votes

Q Could this be used to clamp onto wood slabs cut out of logs and pick them up. And is that US dollars answer now
Asked by walt guettler on October 23, 2019 3:30 am

Answered by the admin
Hi Walt,

yes this scissor lifting clamp can be used to move wood slabs, you ave to check capacity and the claw width. Yes, you have dollar price if you see it in euro change the currency with the drop menu up in the page close to the Flag.
You have the amount in dollars but at the check-out, you pay in euro. If you pay by credit card the bank automatically converts the euro amount in dollars one. No problem, we receive a lot of orders from the US.
If you need help do not hesitate to write to us again.