FIX ALL High Tack | Strong Bonding and Immediate Grab | White – Soudal

FIX ALL High Tack | High Initial Grab and Final Strength up to 320 kg/10 cm² | White – Soudal

Soudal FIX ALL High Tack is a high-quality hybrid adhesive-sealant based on SMX Polymer technology, designed to provide very high initial grab and strong, flexible bonding performance.

With a final bond strength of up to 320 kg/10 cm², it is ideal for bonding, sealing and filling applications where both immediate grab and long-lasting strength are required.

FIX ALL High Tack adheres to most common building materials and surfaces, both porous and non-porous, and can also be applied on slightly damp surfaces. It is suitable for indoor and outdoor use and offers good resistance to weather conditions and UV exposure.

Thanks to its XS1 fungicide, it provides high resistance to mould growth, making it suitable for sanitary areas such as bathrooms, showers and kitchens. It can also be used for bonding porous natural stone surfaces, such as marble and limestone.

Ideal for mounting skirting boards, ornaments, decorative wall panels, profiles and other elements where strong, immediate grab is required.

Main features:

• Hybrid SMX Polymer adhesive-sealant;
• very high initial grab;
• final bond strength up to 320 kg/10 cm²;
• super strong and durable;
• instant grab when pressed firmly;
• mould-resistant thanks to XS1 fungicide;
• suitable for most common building materials and surfaces;
• suitable for porous and non-porous surfaces;
• can also be used on slightly damp surfaces;
• remains flexible after curing;
• primerless adhesion on many substrates;
• paintable with water-based paints;
• suitable for indoor and outdoor use;
• suitable for all-weather applications;
• virtually odourless.

Limitations:

Not suitable for PE, PP, PTFE, bituminous substrates or copper-containing materials such as bronze and brass. Not suitable for aquarium bonding, glazing applications or applications involving continuous water immersion.

FIX ALL High Tack can be used for bonding natural stone, but it should not be used as a joint sealant on natural stone surfaces.

How to use:

• Surfaces and materials must be sound, clean and free from dust and grease.
• When used as an adhesive, apply FIX ALL High Tack in dots or beads to the material to be bonded, press firmly onto the surface and allow it to set.
• When used as a sealant, apply FIX ALL High Tack in an even bead and smooth immediately before skin formation with a suitable finishing solution or a soapy solution.
• The optimal application temperature is between +5 °C and +35 °C.
• Final strength is achieved after approximately 24 hours, depending on application conditions and bead thickness.