Showing 1–40 of 110 results

Electrical products (15)

Edge Polishers and Polishing machines Parts (11)

Filter presses Parts (5)

Wire Saws Parts (22)

Water Cooling Pipes (11)

Marchetti Hydraulic Tensioner & Tie-rods (41)

Personal Protective Equipment PPE (2)

Moldex Classic series 2045 FFP2 dust Mask – 20 pcs

$3,55 Net of VAT
Moldex Classic Series 2045 FFP2 NR D dust masks (pack of 20 pcs) Moldex Classic Series 2045 FFP2 NR D

Wireless remote control system Q-Series – LCC

$198,43$322,72 Net of VAT
Wireless remote control system Q-Series – LCC Industrial wireless radio controls for the remote control of cranes, gantries, and industrial

Seal kit for valve DN150

$80,31 Net of VAT
Seal kit for valve DN150 Replaceable Seal kit for valve DN150 You may be interested in Rubber sleeve for pneumatic

Coolant Rotary Unions for rotating spindle – Rotoflux

$434,26$469,50 Net of VAT
Rotating unions for high-speed rotating spindle – Rotoflux Series A8 Rotary union for the passage of water through the spindles

Rubber Profile Bidese/Breton 1000mm-flywheels

$109,56 Net of VAT
Rubber Profile (seal, gasket) for Bidese/Breton 1000 mm diameter flywheels Special Rubber Liner to protect single-wire flywheels. It’s the rubber

Spare Parts Portable Router Sector – Ghines

$336,29$363,45 Net of VAT
Spare Parts for the Stone Portable Router Sector – Ghines Spare parts for the Portable Stone Router Sector Tiplespeed. Kit

Gearboxes parts

$214,10$490,86 Net of VAT
Gearboxes parts Gearboxes parts for stone working machines such as gangsaws and block cutters Available parts for gearboxes RAV120 and

Rubber sleeve for pneumatic valves

$198,43$313,32 Net of VAT
Rubber sleeve for pneumatic valves Rubber sleeve for pneumatic valves, available in 3 sizes: DN125, DN150 and DN200. You may

Candiani – Aluminium flywheel Ø600

$830,29 Net of VAT
Candiani – Aluminum flywheel Ø600 Aluminum flywheel diameter 600 mm installed on Candiani single-wire saws, Superior 3500 model. The price

Pendant control station – Giovenzana

$112,24 Net of VAT
Pendant control station Giovenzana – single row 5 buttons Pendant Station PL05: Giovenzana single-wire pendant controller with 5 buttons (4

Contrast roller for edge polisher Comandulli

$13,47 Net of VAT
Contrast roller for edge polisher Comandulli

Carter hinges – Pellegrini

$72,06 Net of VAT
Pellegrini single-wire fiberglass door hinge (DF2000 and DF25000) Original Pellegrini Meccanica hinges for single wire fiberglass doors Each door needs

Hub for Bidese multiwire Flywheel

$125,33 Net of VAT
Hub for Bidese multiwire Flywheel Hub for tensioner wheels of Bidese granite multiwires. The hub is made of 3 parts.

Slab holder wheels – Comandulli

$114,78 Net of VAT
Slab holder wheels for Comandulli Complete slab holder wheels for Comandulli edge polishers

Cylindrical protective bellows Molerit – Comandulli

$36,55 Net of VAT
Cylindrical protective bellows Molerit for Comandulli machines Molerit Protective bellows for Comandulli spindles.

Rubber rings – Comandulli

$9,40 Net of VAT
Rubber ring for slab holder wheels Comandulli Rubber ring for slab holder wheels installed in Comandulli machines. Overall diameter of

Slab holder rollers – Sassomeccanica

$36,45 Net of VAT
Sassomeccanica Slab holder rollers Slabe holder rollers for edge polishing machine Sassomeccanica. These rollers are spare parts Sassomeccanica original. Rollers

Polycarbonate Face Shield

$10,34 Net of VAT
Polycarbonate Face Shield It protects the face and eyes against splashes and sprays, it is perfectly transparent also giving good

Battery Gancho Mini-Din 25

$104,44 Net of VAT
Battery Gancho Mini-Din 25 with long life Battery capacity: 2.000 mAh Voltage: 7.2 V This Gancho Mini-Din 25 battery is

Rubber matting for saw-tables and cross cutters

$162,92$174,82 Net of VAT
Rubber saw-table and cross-cutter mattings Increasingly often, rubber mats are the material of choice as protective coatings on stone cutting

Plastic roller for roller conveyors

$2,61$10,44 Net of VAT
Plastic roller for roller conveyors Idle plastic roller used on rollers for loading and unloading material. On request, it’s possible to

Backing pad snail fitting

$67,78$73,11 Net of VAT
Backing pad diameter 130 mm and 150 mm with snail lock fitting Backing pads used for mounting tools or abrasives

Pneumatic pump Versa-Matic for filter press feeding

$1.180,16 Net of VAT
Versamatic pneumatic pump for filter press feeding Specifications: Flow Rate: 0 – 70 gpm (0-265 lpm) Type of pump: Elima-Matic Double diaphragm Thread size:

Flare Nozzle

$3,76$4,70 Net of VAT
Flare Nozzle available in two different models Can be used with coolants, fluids and air lines. Suitable for all wet

Pressure roller kit for Cavani edge polishers

$174,83 Net of VAT
Pressure roller kit for Cavani edge polishers This pressure roller is mounted on the Cavani edge polishers. With the roller

Trolley arm for encoder wheel in Pellegrini trolley

$656,92 Net of VAT
Trolley arm for encoder wheel in Pellegrini trolley Support used for the installation of the wheel and the encoder on

Absolute shaft encoders

Send the code of your encoder and/or photo. You will receive a quotation of your own encoder or an equivalent within 24h

    Not available

    Incremental shaft encoders

    Send the code of your encoder and/or photo. You will receive a quotation of your own encoder or an equivalent within 24h

      Not available

      Hydraulic Crimping Pliers HT45 for Diamond Wire Saw

      $909,66 Net of VAT
      Hydraulic Crimping Pliers for Diamond Wire Saw Force developed: 50 kN Rated operating pressure: 600 bar Type of action: Crimp

      Flocculant polyelectrolyte for marble/granite – 25 Kg bag

      $106,01$114,88 Net of VAT
      Flocculant polyelectrolyte for marble/granite – 25Kg Bag Chemical flocculant used for sludge settling in the silos (or water tank). The

      Flexible couplings for polishing heads

      $41,78$131,59 Net of VAT
      Flexible couplings also called rubber antivibrations Flexible couplings for heads in marble/granite polishers and gangsaw (Barsanti, Breton, Gaspari Menotti, Simec, radial arm

      Wheel and shaft for wire saw columns DF – Pellegrini

      $339,43 Net of VAT
      Wheel and shaft for wire saw columns DF – Pellegrini Meccanica Wheel installed in columns for the raise and fall

      Knob for Multi-Turn Potentiometer

      $36,34 Net of VAT
      Knob for Multi-Turn Potentiometer Knob 11 turns ABS plastic construction Excellent reliability High accuracy Locking level for fixed position Supplied

      Joystick 2/4 Positions NO

      $31,23$36,45 Net of VAT
      Joystick 2 or 4 positions NO Switch standard: 22 mm Button color: Black

      Bourns – Multiturn potentiometer 10KΩ

      $28,72 Net of VAT
      Multiturn potentiometer 10KΩ Tolerance: ±5% Linearity tolerance: ±0.25% Minimum insulation resistance: 1000MΩ Body dimensions: Ø22.22 x 18.6mm Number of electrical turns: 10 Length of

      Bourns – Single turn potentiometer 10KΩ complete with knob

      $26,53 Net of VAT
      Bourns – Single turn potentiometer 10KΩ complete with knob Tolerance: ±20% Electrical rotation angle: 250° Mounting thread: 3/8″x32UNEF Length of the axis

      Gloss Meter YG 60°

      $312,27 Net of VAT
      Gloss Meter YG 60° to measure the gloss units of the surfaces Professional gloss meter to measure the gloss of

      LS – Inverter S100 0,4~75 kW Three phase 380/480V

      $295,77$3.768,15 Net of VAT
      LS – Inverter S100 0,4~75 kW Three phase 380/480V Integrated EMC filter up to 45 kW (for the higher sizes

      Aluminium holder for Frankfurt abrasives

      $5,12 Net of VAT
      Aluminum support for Frankfurt abrasives Available DX and SX aluminium holders to mount products with Frankfurt fitting, for automatic or

      Aluminum flexible coupling

      $26,11 Net of VAT
      Aluminum flexible coupling type bellow Aluminum flexible coupling made with a cylindrical body in aluminum alloy on which a helical

      Spare Parts/Accessories

      We offer a wide range of spare parts for stone working machines CNC machines, single wire saws, filter presses, and much more.  These parts range from rubber liners and flywheels to flexible modular piping systems bridge saws. We have the most highly demanded accessories for Italian-made stoneworking machinery brands including Bidese/Breton, Pellegrini Meccanica, Fraccaroli & Balzan, and many others.

      If you require parts not listed in this section, that’s no problem at all. Simply contact us with the machine brand, model, serial number, or part number from the manual, and photos of the worn part. We’ll reply with a detailed offer ASAP.

      For special spare parts or the estimated shipment date, please contact us directly at