Showing 1–40 of 63 results

ROKER / DIA-ROKER scratching tool spare parts – Lupato

4,25 12,75  Net of VAT
Spare parts for Roker and Dia-Roker rollers – Lupato meccanica 8 bits tip for Roker (scratching finish roller for marble)

Plate for coarse comma finish | Kinki 3 – Lupato

675,75  Net of VAT
Plate for coarse comma finish | Kinki 3 – Lupato Kinki is a tool for coarse comma finish on marble

Roller holders – 40×30 mm – Lupato

30,60  Net of VAT
Roller holders 40×30 mm – Lupato 40×30 mm roll holders spare part for Lupato sandblasting and bush-hammering plates. These roll

Shock absorber – Lupato

34,85  Net of VAT
Shock absorber – Lupato Shock absorber spares part for Lupato sandblasting and bush-hammering plates. These shock absorber are compatible with

Bush-hammering planet wheel – Tanga – Lupato

86,70 102,00  Net of VAT
Bush-hammering planet wheel fro Tanga L3/L4 – Lupato Bush-hammering planet wheel for the bush-hammering plate Tanga L4 and bush-hammering plate Tanga L3.

Sandblasting planet wheel – Tanga – Lupato

81,60 123,25  Net of VAT
Sandblasting planet wheel – Tanga – Lupato This Lupato spare part is a sandblasting planet wheel for the  angle grinder

COSTA Bush hammering plate for edge polisher – Lupato

541,45 724,20  Net of VAT
COSTA Bush hammering plate for edge polisher – Lupato Costa 2 bullnose designed specifically for bush-hammering of bulls on marble,

DRAGO Bridge saw tool for rolling/combed texture – Lupato

845,75  Net of VAT
DRAGO Bridge saw tool for rolling/combed texture – Lupato Drago by Lupato Meccanica is a portable tool to be mounted

TANGA L3 Angle-grinder sandblasting plate – Lupato

313,65 463,25  Net of VAT
Angle-grinder sandblasting plate diameter 110mm– Tanga L3 – Lupato 3-roller sandblasting plate with a dimaeter of  110 mm for angle

Protective cover for Tanga L3 plate – Lupato

128,35  Net of VAT
Protective cover for Sumo/Stona/Tanga L4 plate – Lupato Protection for tool ø110mm with guide is a metal protection completed with

STONA ABRAX Surface sandblasting plate for angle grinder – Lupato

322,15 416,50  Net of VAT
STONA ABRAX Surface sandblasting plate for angle grinder- Lupato Sandblasting plate for natural stone surfaces. The plate consists of 4

STONA bush-hammering plate for angle grinder – Lupato

335,75  Net of VAT
Surface bush-hammer plate dia.150mm for angle grinder Stona – Lupato Stona is a plate for angle grinders with a diameter

GIVRE Polishing machine Plate for medium comma finish marble – Lupato

662,15 2.788,00  Net of VAT
Polishing machine Plate for medium comma finish marble – Givre – Lupato Tool plate for polishing machine for the comma

Frankroll abrax frankfurt sandblasting rollers – Lupato

106,25 198,90  Net of VAT
Frankfurt sandblasting rollers – Frankroll abrax Lupato Sandblasting rollers with Frankfurt connection for use on plates of arm polishers, and

Frankfurt nicking rollers – Frankroll Lupato

141,10 288,15  Net of VAT
Frankfurt nicking rollers – Frankroll Lupato Lupato Frankroll Rollers for nicking effect texture. It’s a tool with a standard Frankfurt

Nicking roller for Spunty plate- Lupato

141,10  Net of VAT
Nicking roller for Spunty plate – Lupato Replacement roller for Lupato plate for a nicking effect on stone and marble.

Nicking plate “Spunty” for polishing machines – Lupato

701,25 1.351,50  Net of VAT
Nicking plate “Spunty” for polishing machines – Lupato Nicking plate for manual and automatic polishing machines for processing slabs and

Nicking roller for angle grinder – Sumo – Lupato

73,95  Net of VAT
Nicking roller for angle grinder – Sumo – Lupato Spare rollers for the SUMO Nicking plate

Protective cover for Sumo/Stona/Tanga L4 plate – Lupato

114,75 156,40  Net of VAT
Protective cover for Sumo/Stona/Tanga L4 plate – Lupato Protection for tool ø150mm with guide is a metal protection completed with

SUMO Angle Grinder Nicking Texturing Plate marble- Sumo3/9 Lupato

480,25  Net of VAT
Angle Grinder Nicking Texturing Plate for marble- Sumo – Lupato Sumo 3/9 is a tool with a diameter of 150

Comma roller for marble – Givre- Lupato

90,10  Net of VAT
Comma roller – Givre- Lupato Spare comma rollers for marble.

TANGA L3 Mini grinder bush-hammering plate (antiskid 3-10 cm) – Lupato

323,00 429,00  Net of VAT
Mini grinder bush-hammering plate for stone, antiskid 3-10 cm, Tanga L3 – Lupato If you need to make a 3-10

Anti-skid Floor Clear Paint – CHT

Anti-Skid (Anti-slip) Clear (transparent) Paint – Antiskid Antiskid is  a special transparent and odorless paint for all surfaces (natural stone,
Not available

Frankfurt bush-hammer rollers – Frankroll Lupato

113,05 287,30  Net of VAT
Frankfurt bush-hammer rollers – Frankroll Lupato Frankroll Lupato is the frankfurt support that you can install on any frankfurt plate.

Polishing machine Plate marble bush hammering – Varia – Lupato

565,25 2.690,25  Net of VAT
Polishing machine Plate for the marble bush hammering – Varia – Lupato meccanica Varia Plate is the tool you can

Roller for bush-hammering marble – Varia – Lupato

62,90 88,40  Net of VAT
Roller for marble bush-hammering  – Varia – Lupato Meccanica Replacement tools for the Varia plate for the marble surfaces bushammering.

Polishing machine Plate for sandblasting marble – Abrax – Lupato

520,20 2.091,00  Net of VAT
Marble sandblasting head for polishing machine. Abrax – Lupato Meccanica This is a plate to install in polishing machines both

Roller for sandblasting marble – Abrax – Lupato

56,10  Net of VAT
Roller for marble sandblasting – Abrax plate– Lupato Meccanica Replacement sandblasting roller for the Abrax plate (head) for polishing machines. Available in

Polishing machine Plate – granite bush hammering – Hammer – Lupato

764,15 2.332,40  Net of VAT
Polishing machine Plate granite bush hammering – Hammer – Lupato Meccanica Hammer Bushammering plate is a tool for granite, to

Bush-hammer Roller for Granite – Hammer Lupato

95,20 113,05  Net of VAT
Roller tool for the granite bush-hammering plate – Lupato Meccanica Replacement bush-hammering tools for the Hammer plates for polishing machines.

Polishing machine Plate for sandblasting granite – Dia-Abrax – Lupato

810,90 3.741,70  Net of VAT
Polishing machine Plate for granite sandblasting – DiaAbrax – Lupato Meccanica Plate head for automatic polishing machine and manual polisher.

DIA-ABRAX Roller for granite sandblasting plate – Lupato

119,00 132,60  Net of VAT
DIA-ABRAX Roller for granite sandblasting plate for polishing machines Spare sandblasting rollers for granite. The rollers’ diameter is 50mm. To be installed

Bridge saw Roller for scratching finish Roker- Lupato

811,75 2.764,20  Net of VAT
Bridge saw roller tool for scratching finish Roker – Lupato Meccanica Scratching roller Roker model – Diameter 300 mm (12″) 

Bush-hammering roller – Tanga – Lupato

37,40 45,90  Net of VAT
Bush-hammering roller – Tanga L3 and L4 – Lupato Meccanica Replacement bush-hammering roller for the bush-hammering plate Tanga L4 and bush-hammering

Sandblasting roller – Tanga – Lupato

33,15 73,10  Net of VAT
Sandblasting roller – Tanga – Lupato Replacement sandblasting roller for the angle grinder plate Tanga L4 Lupato meccanica and angle

Angle grinder cover – Lupato

123,25  Net of VAT
Angle grinder cover Protection Carter for BOSCH GPO 14 CE and RUPES LH32EN grinders for the use of Rollex rollers

TANGA L4 Angle-grinder bush-hammering plate (antiskid 5-13 cm) – Lupato

411,40 549,10  Net of VAT
Angle-grinder bush-hammering plate, antiskid 5-13 cm, – Tanga L4 – Lupato Bush hammering head (plate) to use on angle grinders.

TANGA L4 Angle-grinder sandblasting plate – Lupato

397,80 655,35  Net of VAT
Angle-grinder sandblasting plate – Tanga L4 – Lupato Plate for sandblasting texture to use on an angle grinder. Available for

Bush-hammering roller – VOR – Lupato

54,40 84,15  Net of VAT
Bush-hammering roller – VOR – Lupato Meccanica Replacement bushhammering plates Vor Lupato Meccanica. Roller tool for Bush-hammering textured finish on

Sandblasting roller – VOR/STONA- Lupato

49,30 73,10  Net of VAT
Sandblasting roller for VOR and STONA tools – Lupato Meccanica Replacement sandblasting plates Vor and STONA tools. Available for sandblasting

Bush-hammering machines, sand-blasting, and other texturing machines


With the tools in this category, it’s possible to achieve fabulous textures with extraordinary precision of timeless beauty. Bush-hammered, nicked, sandblasted, scratched, rolled, grooved, and grooved stone finishes are possible with these tools.

The bushhammering texturing technique is widely used on all stone materials and consists of physically imparting a corrugated rustic appearance to the stone. The texture can be achieved manually with a bushhammer or with automatic machines. In this section, we offer plates and rollers for automatic and semi-automatic bush-hammering machines used most commonly used by stoneworkers. Bushhammer rollers have carbide tips and the different models are based on the number of tips.

Sandblasting, like bushhammering, is a widely used stoneworking technique to roughen marble and granite surfaces making them non-slip for safety purposes.

The tools we sell are used on grinders, radial arm polishers, single head slab polishers, bridge saws, radial arm polishers, single-head slab polishers, bridge saws, edge polishers, and automatic machines.