1. Marcos Sierra (verified owner) –

    Very good , no noises and clean cuts

    Diatex “MITERcut” 45° bridge saw blade for ceramicsDiatex “MITERcut” 45° bridge saw blade for ceramics

  2. Carl Nelson (verified owner) –

    fits

    ER Collet Nuts - IMSER Collet Nuts – IMS

  3. Carl Nelson (verified owner) –

    looking forward to seeing if there’s good holding capability and no rust.

    ER ColletER Collet

  4. Carl Nelson (verified owner) –

    it just a wrench…?

    Wrench for ER Collet NutsWrench for ER Collet Nuts

  6. Carl Nelson (verified owner) –

    let you know more after I cut some stone.

    Flat electroplated replaceable finger bit tip - DiamarFlat electroplated replaceable finger bit tip – Diamar

  7. Carl Nelson (verified owner) –

    ordered M10 and M12 versions, see comment below.

    Electroplated threaded finger bit for replaceable tips – Marble – DiamarElectroplated threaded finger bit for replaceable tips – Marble – Diamar

  8. Denis Baljak (verified owner) –

    Ok

    Amastone engraving bits for marbleAmastone engraving bits for marble

  9. Denis Baljak (verified owner) –

    Ok

    30° Flat-Tip Carbide Router Bits - OMGF30° Flat-Tip Carbide Router Bits – OMGF

  10. Denis Baljak (verified owner) –

    Allok

    Carbide V-Groove Router BitsCarbide V-Groove Router Bits

  11. Denis Baljak (verified owner) –

    All ok

    Engraving router bit - 14 mm cylindrical shank - Marble - OMGFEngraving router bit – 14 mm cylindrical shank – Marble – OMGF

  12. Fawwaz Alnuaimi (verified owner) –

    👍, thanks for your cooperation ,,

    QEM - Panel meters MC235.01T for Pellegrini wire sawQEM – Panel meters MC235.01T for Pellegrini wire saw

  13. RYAN BRUNT (verified owner) –

    very good

    Bush-hammering roller - Tanga L4 - LupatoBush-hammering roller – Tanga L4 – Lupato

  14. RYAN BRUNT (verified owner) –

    very good

    Sandblasting roller - Tanga L4 - LupatoSandblasting roller – Tanga L4 – Lupato

  15. RYAN BRUNT (verified owner) –

    very good

    Angle-grinder sandblasting plate - Tanga L4 - LupatoAngle-grinder sandblasting plate – Tanga L4 – Lupato

  16. Sedat Kerim (verified owner) –

    Is not the one I received. Is different.I ordered this on the picture and received different bottom part!!!

    Flat electroplated replaceable finger bit tip - DiamarFlat electroplated replaceable finger bit tip – Diamar

  18. Algarstone Marmores e Granitos Lda (verified owner) –

    Nice and fast

    1/41/4″ Hose kit – 35 cm

  19. Algarstone Marmores e Granitos Lda (verified owner) –

    Nice and fast.

    Flare NozzleFlare Nozzle

  20. Dimitrios P. (verified owner) –

    Fast delivery ! Quality products ! I’ ll buy again for sure !

    Electroplated finger bit for Marble - DiamarElectroplated finger bit for Marble – Diamar

  21. CARLO ALISE (verified owner) –

    Top notch product and received in a short amount of time !! Thank you Amastone

    Tool holder fork Prussiani ISO 40 - GNCTool holder fork Prussiani ISO 40 – GNC

  22. Michael C. (verified owner) –

    I will trial these on our machines in the coming weeks but quality looks good and we received them in just over a week, usually it takes longer to get the Intermac forks and they are three time the price.

    Tool holder fork Intermac ISO 40 - GNCTool holder fork Intermac ISO 40 – GNC

  23. Paul Allison (verified owner) –

    Efficient service

    Angle-grinder bush-hammering plate - Tanga L4 - LupatoAngle-grinder bush-hammering plate – Tanga L4 – Lupato

  24. Anonymous (verified owner) –

    Great service

    Electroplated finger bit - Marble - NicolaiElectroplated finger bit – Marble – Nicolai

  25. Anonymous (verified owner) –

    Great service

    Tool Holder Cone for Stubbing Wheels ISO 50 - GMM - IMSTool Holder Cone for Stubbing Wheels ISO 50 – GMM – IMS

  26. Anonymous (verified owner) –

    Great service

    Pull stud for tool holder cone ISO 50 - IMSPull stud for tool holder cone ISO 50 – IMS

  27. Anonymous (verified owner) –

    Great service

    1/2 Gas drill point holder cone ISO 50 - GMM - IMS1/2 Gas drill point holder cone ISO 50 – GMM – IMS

  28. Anonymous (verified owner) –

    Great service

    Electroplated stubbing wheel - Marble - NicolaiElectroplated stubbing wheel – Marble – Nicolai

  29. Anonymous (verified owner) –

    Fast service especially at this rather extraordinary time.

    Fibre sanding discs with depressed centre - Saitdisc - SaitFibre sanding discs with depressed centre – Saitdisc – Sait

  30. Fiona Incorvaja (verified owner) –

    Great service

    Concentrated acid detergent DETERDEK - FilaConcentrated acid detergent DETERDEK – Fila

  31. David O’Leary (verified owner) –

    Easy to used website

    Encoder wheel 200x45 mm for wire saw (Pellegrini compatible)Encoder wheel 200×45 mm for wire saw (Pellegrini compatible)

  32. Luisel Zayas –

    Nicolai tools are very good and consistent quality. They are a bit on the expensive side and I wish they will offer multiple grits. Overall very reliable.

    Electroplated stubbing wheel - Marble - NicolaiElectroplated stubbing wheel – Marble – Nicolai

  33. Luisel Zayas (verified owner) –

    We are very happy with the quality and performance. Very good prices compared to other distributes locally or internationally.

    Carbide conic carving router bit - MarbleCarbide conic carving router bit – Marble

  34. Luisel Zayas (verified owner) –

    I work for Quarrastone Company, we produce high complexity geometries architectural and fine art pieces all around the world. These are the most aggressive tools we have ever tried. We are very happy with the quality and performance. We not only saved money, but we were able to accelerate our production times with these tools. Last but not least, The people at Amastone are fast and great communicators, we have better communication with them than with our US suppliers! Marco and Salvatore will reply to my emails or chat messages within minutes, no matter what time of the day it is. These are crucial for international companies like ours. Try it you won’t be disappointed.

    Electroplated stubbing wheel – MarbleElectroplated stubbing wheel – Marble

  35. Aleksandar Jokic –

    This is best web site to buy stone tools, we have been buying some parts for two years now and everything arrived on time, the first time in our business that we can buy tools and parts from home. BRAVO!!

    Polishing machine Plate marble bush hammering – Varia – LupatoPolishing machine Plate marble bush hammering – Varia – Lupato

  36. Cyril Danko (verified owner) –

    solid drill bits

    Blind hole drill bits for Granite, Engineered stone, Ceramic - NicolaiBlind hole drill bits for Granite, Engineered stone, Ceramic – Nicolai

  37. Neil Andrew (verified owner) –

    Was looking for a top quality laser for my bridge saw. The green mini is ideal. Well built, robust and the green laser light visible in all light conditions. The laser supplied with an excellent, fully adjustable mounting bracket making installation very simple.
    Would highly recommend this product.

    Green Alignment Laser Line 30mW / 50mW - MiniGreen Alignment Laser Line 30mW / 50mW – Mini

  38. Thomas Cusumano (verified owner) –

    They are excellent quality at a good price

    Round suction cup Ø200 mm - GNCRound suction cup Ø200 mm – GNC

1 2