Showing 1–60 of 67 results

FILIFLEX Antiquing Frankfurt brushes – Tenax

35,00  Net of VAT
FILIFLEX Antiquing Frankfurt fitting brushes – Tenax Diamond brushes Filiflex Tenax available in grit 36. Frankfurt-type attachment. Special brushes with

Anti-Slip Bands Diamond wheel – Amastone

180,00  Net of VAT
Vacuum brazed diamond wheel to make anti-slip strips on marble, stone, and granite Vacuum brazed diamond wheel (30/40 grit) for

TANGA Replacement glide – Lupato

46,75 56,10  Net of VAT
TANGA Replacement glide – Lupato meccanica Replacement part for the TANGA sandblasting and bush-hammering plates Available in 2 versions: 110mm-diameter:

FRANKROLL replacement support frankfurt – Lupato

68,00 107,95  Net of VAT
Replacement support for FRANKROLL – Lupato meccanica Replacement support for FRANKROLL tools by Lupato Meccanica. It’s the replacement support for

Micra Replacement glide Ø 125 mm with shank – Lupato

80,75  Net of VAT
Replacement glide Ø 125 mm with shank “Micra” – Lupato meccanica Replacement glide for the MICRA Bush-Hammer Plate for Mini-grinder

MICRA Replacement roller Ø42 mm – Lupato

80,75  Net of VAT
Replacement roller Ø 42 mm “Micra” – Lupato meccanica Replacement roller for MICRA Bush-Hammer Plate for Mini-grinder – Lupato

MICRA Replacement planet wheel – Lupato

131,75  Net of VAT
Replacement planet wheel “Micra” – Lupato meccanica Replacement planet wheel for the MICRA Bush-Hammer Plate for Mini-grinder – Lupato

TANGA Replacement Guide for tool protection | Lupato

42,50 51,00  Net of VAT
Replacement guide for tool protection – Lupato meccanica Replacement guide accessory for the TANGA tool Diameter 100 mm for the

STONA Replacement glide Ø 150 | Lupato

54,40  Net of VAT
Replacement glide Ø 150 mm STONA – Lupato meccanica Replacement glide for STONa Lupato tools: STONA bush-hammering plate STONA Abrax

Replacement planet wheel – Costa 2 – Lupato

165,75  Net of VAT
Replacement planet wheel “Costa 2” – Lupato meccanica

HAMMER Lupato Replacement shock absorber 

50,15  Net of VAT
Hammer Lupato Replacement shock absorber Shock absorber replacement part for the HAMMER Lupato plate for polishing machine.

Lupato Pressure Gauge Instrument

204,00  Net of VAT
Pressure Gauge Lupato instrument – Lupato meccanica Pressure gauge tool for the Lupato Meccanica tool series: SPUNTY Nicking plate for

PIKO Comma Effect Roller for marble – Lupato

250,75 382,50  Net of VAT
PIKO Comma Effect Roller D115mm for marble – Lupato Marble and limestone comma effect roller diameter 115mm, designed to be

MICRA Bush-Hammer Plate for Mini-grinder – Lupato

500,65 662,15  Net of VAT
Bush hammer plate for marble and granite mini-angle grinder MICRA – Lupato Meccanica Bush hammer plate for marble and granite

ROKER / DIA-ROKER scratching tool spare parts – Lupato

5,10 12,75  Net of VAT
Spare parts for Roker and Dia-Roker rollers – Lupato meccanica 8 bits tip for Roker (scratching finish roller for marble)

Plate for coarse comma finish | Kinki 3 – Lupato

675,75  Net of VAT
Plate for coarse comma finish | Kinki 3 – Lupato Kinki is a tool for coarse comma finish on marble

Roller holders – 40×30 mm – Lupato

39,10  Net of VAT
Roller holders 40×30 mm – Lupato 40×30 mm roll holders spare part for Lupato sandblasting and bush-hammering plates. These roll

Shock absorber – Lupato

37,40  Net of VAT
Shock absorber – Lupato Shock absorber spares part for Lupato sandblasting and bush-hammering plates. These shock absorber are compatible with

Bush-hammering planet wheel – Tanga – Lupato

86,70 112,20  Net of VAT
Bush-hammering planet wheel fro Tanga L3/L4 – Lupato Bush-hammering planet wheel for the bush-hammering plate Tanga L4 and bush-hammering plate Tanga L3.

Sandblasting planet wheel – Tanga – Lupato

81,60 123,25  Net of VAT
Sandblasting planet wheel – Tanga – Lupato This Lupato spare part is a sandblasting planet wheel for the  angle grinder

COSTA Bush hammering plate for edge polisher – Lupato

541,45 714,85  Net of VAT
COSTA Bush hammering plate for edge polisher – Lupato Costa 2 bullnose designed specifically for bush-hammering of bulls on marble,

DRAGO Bridge saw tool for rolling/combed texture – Lupato

845,75  Net of VAT
DRAGO Bridge saw tool for rolling/combed texture – Lupato Drago by Lupato Meccanica is a portable tool to be mounted

TANGA L3 Angle-grinder sandblasting plate – Lupato

313,65 463,25  Net of VAT
Angle-grinder sandblasting plate diameter 110mm– Tanga L3 – Lupato 3-roller sandblasting plate with a dimaeter of  110 mm for angle

Protective cover for Tanga L3 plate – Lupato

144,50  Net of VAT
Protective cover for Sumo/Stona/Tanga L4 plate – Lupato Protection for tool ø110mm with guide is a metal protection completed with

STONA ABRAX Surface sandblasting plate for angle grinder – Lupato

322,15 416,50  Net of VAT
STONA ABRAX Surface sandblasting plate for angle grinder- Lupato Sandblasting plate for natural stone surfaces. The plate consists of 4

STONA bush-hammering plate for angle grinder – Lupato

335,75  Net of VAT
Surface bush-hammer plate dia.150mm for angle grinder Stona – Lupato Stona is a plate for angle grinders with a diameter

GIVRE Polishing machine Plate for medium comma finish marble – Lupato

662,15 2.788,00  Net of VAT
Polishing machine Plate for medium comma finish marble – Givre – Lupato Tool plate for polishing machine for the comma

FRANKROLL abrax frankfurt sandblasting rollers – Lupato

111,35 205,70  Net of VAT
Frankfurt sandblasting rollers – Frankroll abrax Lupato Sandblasting rollers with Frankfurt connection for use on plates of arm polishers, and

FRANKROLL Frankfurt Nicking Rollers – Lupato

147,90 296,65  Net of VAT
Frankfurt nicking rollers – Frankroll Lupato Lupato Frankroll Rollers for nicking effect texture. It’s a tool with a standard Frankfurt

Nicking roller for Spunty plate- Lupato

104,55 141,10  Net of VAT
Nicking roller for Spunty plate – Lupato Replacement roller for Lupato plate for a nicking effect on stone and marble.

Nicking plate “Spunty” for polishing machines – Lupato

701,25 1.351,50  Net of VAT
Nicking plate “Spunty” for polishing machines – Lupato Nicking plate for manual and automatic polishing machines for processing slabs and

Nicking roller for angle grinder – Sumo – Lupato

66,30  Net of VAT
Nicking roller for angle grinder – Sumo – Lupato Spare rollers for the SUMO Nicking plate

Protective cover for Sumo/Stona/Tanga L4 plate – Lupato

123,25 161,50  Net of VAT
Protective cover for Sumo/Stona/Tanga L4 plate – Lupato Protection for tool ø150mm with guide is a metal protection completed with

SUMO Angle Grinder Nicking Texturing Plate marble- Sumo3/9 Lupato

480,25  Net of VAT
Angle Grinder Nicking Texturing Plate for marble- Sumo – Lupato Sumo 3/9 is a tool with a diameter of 150

Comma roller for marble – Givre- Lupato

90,10  Net of VAT
Comma roller – Givre- Lupato Spare comma rollers for marble.

TANGA L3 Mini grinder bush-hammering plate (antiskid 3-10 cm) – Lupato

323,00 429,25  Net of VAT
Mini grinder bush-hammering plate for stone, antiskid 3-10 cm, Tanga L3 – Lupato If you need to make a 3-10

Anti-skid Floor Clear Paint – CHT

Anti-Skid (Anti-slip) Clear (transparent) Paint – Antiskid Antiskid is  a special transparent and odorless paint for all surfaces (natural stone,
Not available

FRANKROLL Frankfurt bush-hammer rollers – Lupato

101,15 295,80  Net of VAT
Frankfurt bush-hammer rollers – Frankroll Lupato Frankroll Lupato is the frankfurt support that you can install on any frankfurt plate.

Polishing machine Plate marble bush hammering – Varia – Lupato

565,25 2.690,25  Net of VAT
Polishing machine Plate for the marble bush hammering – Varia – Lupato meccanica Varia Plate is the tool you can

Roller for bush-hammering marble – Varia – Lupato

62,90 88,40  Net of VAT
Roller for marble bush-hammering  – Varia – Lupato Meccanica Replacement tools for the Varia plate for the marble surfaces bushammering.

Polishing machine Plate for sandblasting marble – Abrax – Lupato

520,20 2.091,00  Net of VAT
Marble sandblasting head for polishing machine. Abrax – Lupato Meccanica This is a plate to install in polishing machines both

ABRAX Rollers for marble sandblasting – Lupato

56,10  Net of VAT
ABRAX Rollers for marble sandblasting Diameter 50mm- Lupato Meccanica Replacement sandblasting Lupato rollers for: Abrax plate (head) for polishing machines

HAMMER Lupato Polishing machine Plate – granite bush hammering

764,15 2.332,40  Net of VAT
Polishing machine Plate granite bush hammering – Hammer – Lupato Meccanica Hammer Bushammering plate is a tool for granite, to

Bush-hammer Roller for Granite – Hammer Lupato

95,20 113,05  Net of VAT
Roller tool for the granite bush-hammering plate – Lupato Meccanica Replacement bush-hammering tools for the Hammer plates for polishing machines.

Polishing machine Plate for sandblasting granite – Dia-Abrax – Lupato

810,90 3.741,70  Net of VAT
Polishing machine Plate for granite sandblasting – DiaAbrax – Lupato Meccanica Plate head for automatic polishing machine and manual polisher.

DIA-ABRAX Roller for granite sandblasting plate – Lupato

106,25 123,25  Net of VAT
DIA-ABRAX Roller for granite sandblasting plate for polishing machines Spare sandblasting rollers for granite. The rollers’ diameter is 50mm. To be installed

Bridge saw Roller for scratching finish Roker- Lupato

1.066,75 2.975,00  Net of VAT
Bridge saw roller tool for scratching finish Roker – Lupato Meccanica Scratching roller Roker model – Diameter 300 mm (12″) 

Bush-hammering roller – Tanga – Lupato

37,40 50,15  Net of VAT
Bush-hammering roller – Tanga L3 and L4 – Lupato Meccanica Replacement bush-hammering roller for the bush-hammering plate Tanga L4 and bush-hammering

Sandblasting roller – Tanga – Lupato

33,15 73,10  Net of VAT
Sandblasting roller – Tanga – Lupato Replacement sandblasting roller for the angle grinder plate Tanga L4 Lupato meccanica and angle

Angle grinder cover – Lupato

131,75  Net of VAT
Angle grinder cover Protection Carter for BOSCH GPO 14 CE and RUPES LH32EN grinders for the use of Rollex rollers

TANGA L4 Angle-grinder bush-hammering plate (antiskid 5-13 cm) – Lupato

411,40 549,10  Net of VAT
Angle-grinder bush-hammering plate, antiskid 5-13 cm, – Tanga L4 – Lupato Bush hammering head (plate) to use on angle grinders.

TANGA L4 Angle-grinder sandblasting plate – Lupato

397,80 655,35  Net of VAT
Angle-grinder sandblasting plate – Tanga L4 – Lupato Plate for sandblasting texture to use on an angle grinder. Available for

Bush-hammering roller – VOR – Lupato

57,80 84,15  Net of VAT
Bush-hammering roller – VOR – Lupato Meccanica Replacement bushhammering plates Vor Lupato Meccanica. Roller tool for Bush-hammering textured finish on

Sandblasting roller – VOR/STONA- Lupato

51,00 73,10  Net of VAT
Sandblasting roller for VOR and STONA tools – Lupato Meccanica Replacement sandblasting plates Vor and STONA tools. Available for sandblasting

Sandblasting finish plate – VOR – Lupato

527,00 586,50  Net of VAT
Sandblasting finish plate – VOR – Lupato Sandblasting tools plate for VOR portable machine. Available both for marble (Abrax model)

Bush-hammering finish plate  – VOR – Lupato

539,75 589,90  Net of VAT
Bush-hammering finish plate  – VOR – Lupato Meccanica Bush hammering tools plate for VOR portable machine. Finish­ varies­ depending­ on

Portable machine for finishes on flat surfaces  – VOR – Lupato

1.666,00 1.751,00  Net of VAT
Portable machine for finishes on flat surfaces  – VOR – Lupato Meccanica Portable machine ideal for bush hammering and sandblasting

Roller for Scratching antiskid – Lupato

331,50 963,90  Net of VAT
Roller for Scratching antiskid – Lupato “Rocker” and “Dia-Rocker” rollers for making scratching antiskid on sandstone and granite with a

Free tools drum for inline bush hammering antiskid – Birba – Lupato

420,75  Net of VAT
Tools drum for inline bushammering antiskid – Birba – Lupato Free tools drum to use with the Birba portable machine

Roller for rolling antiskid – Lupato

180,20 731,00  Net of VAT
Roller tool for rolling finished antiskid – Lupato Roller tool for “rolling textured finish” antiskid on sandstone and granite. To

Bush-hammering machines, sand-blasting, and other texturing machines


With the tools in this category, it’s possible to achieve fabulous textures with extraordinary precision of timeless beauty. Bush-hammered, nicked, sandblasted, scratched, rolled, grooved, and grooved stone finishes are possible with these tools.

The bushhammering texturing technique is widely used on all stone materials and consists of physically imparting a corrugated rustic appearance to the stone. The texture can be achieved manually with a bushhammer or with automatic machines. In this section, we offer plates and rollers for automatic and semi-automatic bush-hammering machines used most commonly used by stoneworkers. Bushhammer rollers have carbide tips and the different models are based on the number of tips.

Sandblasting, like bushhammering, is a widely used stoneworking technique to roughen marble and granite surfaces making them non-slip for safety purposes.

The tools we sell are used on grinders, radial arm polishers, single head slab polishers, bridge saws, radial arm polishers, single-head slab polishers, bridge saws, edge polishers, and automatic machines.