Carving router bit for CNC machines ideal for making marble bas-reliefs
Conical widia bit for CNC machines ideal for marble, limestone and soft stone. This carving router bit type has a total height of 110 mm and differs from the long shank router bits that have a total height of 170mm.
These widia (sintered carbide) router bits have 1/2 Gas fitting, and for some models, you can choose between holed and not-holed version (holed tools allow inner water flow).
It may happen that these carving router bits are not available in stock, in this case have a look to the alternative product: Carving router bits – Amastone
In the table below you can see the useful dimensions and working parameters for each widia router bit model:
Code | Tip | Radius | Useful height |
Spindle RPM |
Feed rate* |
Maximum depth** |
---|---|---|---|---|---|---|
FK03 FK03F |
3×30 mm | 1,5 mm | 30 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK350 FK350F |
3×50 mm | 1,5 mm | 50 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK05 FK05F |
5×30 mm | 2,5 mm | 30 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK550 FK550F |
5×50 mm | 2,5 mm | 50 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK08 FK08F |
8×30 mm | 4 mm | 30 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK850 FK850F |
8×50 mm | 4 mm | 50 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK20 FK20F |
20×30 mm | 10 mm | 30 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK2050 FK2050F |
20×50 mm | 10 mm | 50 mm | 5000/7000 RPM |
100/500 mm/min |
3 mm |
FK90GF | 90° | 0 mm | 19 mm | 5000/7000 RPM |
100/500 mm/min |
5 mm |
FK90GF2T | 90° 2T | 0 mm | 19 mm | 5000/7000 RPM |
100/500 mm/min |
5 mm |
* the feed rate must be adjusted according to the Z depth and the hardness of the material
** for the making of reliefs, the depth per pass can reach up to cover the entire useful height of the tool
** we recommend a ramp input
Video of some carving router bits for CNC machine
Reviews
Clear filtersThere are no reviews yet.