CNC Diamond Stone Tools
Diamond Blades
Angle Grinder Tools
Polishing Machine Tools for Stone, Marble and Granite
Texture tooling
Adhesives and glue
Ceramic, Granite and Marble Drill Bits
Stone Carving Tools for Sculpting Marble and Granite
Diamond Wires for Granite and Marble Quarries
Cemetery and Mausoleum Accessories
CNC Vacuum Cups
CNC Tool Holders
CNC Tool Forks
Positioning Alignment Lasers
Material Handling
Power Tools
Machinery
Spare parts
Electrical Spare Parts
Personal Protective Equipment
Floor Pads – Brushes
Floor Diamond Resin Tools
Floor Machines
Floor Machine Accessories Spare Parts
GALAXY Diamond Blade for cutting large ceramic slabs with bridge saws – Diatex
Diamond blade with reinforced core, ideal for cutting all ultra-compact ceramic materials (including DEKTON® and LAPITEC®). A high-performance blade that is easy to use on both variable-speed inverter machines and fixed-speed machines.
Cutting large ceramic slabs has never been easier!
- Suitable for use on all types of bridge saws (with or without inverter)
- Excellent adaptability to all speed parameters
- High-quality finishing on all slab thicknesses thanks to the super-thin diamond segment
- Minimal noise thanks to the reinforced and silenced core
- Maximum cutting capacity on all ceramic slab brands (including DEKTON® and LAPITEC®)
Available in diameters of 350 and 400 mm, with thicknesses of 2.4 mm (ø350) and 2.6 mm (ø400) respectively. The height of the diamond segment is 10 mm on both diameters.
Galaxy blade Ø350: 2300-2500 RPM
Galaxy blade Ø400: 2000-2200 RPM
| Slab Thickness | Parameters with Inverter | Parameters without Inverter |
|---|---|---|
| 6-9 mm | Straight-cut feeding speed: 2.5 – 4 m/min 45° Feed Speed: 1.3-2 m/min |
Straight-cut feeding speed:: 2 – 3 m/min 45° Feed Speed: 1 – 1.5 m/min |
| 10-12 mm | Straight-cut feeding speed: 2 – 3.5 m/min 45° Cutting Speed: 1-1.5 m/min |
Straight-cut feeding speed:: 1.5 – 2.5 m/min 45° Feed Speed: 0.7 – 1.2 m/min |
| 13-20 mm | Straight-cut feeding speed: 1.8 – 2.5 m/min 45° Feed Speed: 0.7 – 1 m/ min |
Straight-cut feeding speed:: 1.2 – 1.6 m/min 45° Feed Speed: 0.5 – 0.7 m min |
| 13-20 mm (DEKTON + LAPITEC) | Straight-cut feeding speed: 1.5 – 2 m/min 45° Feed Speed: 0.7 – 1 m/min |
Straight-cut feeding speed:: 1 – 1.4 m/min 45° Feed Speed: 0.5 – 0.7 m min |
Suggestions:
- Blade suitable for cutting all sintered surfaces
- Fully water the contact surface between the segment and the material
- Carefully follow the recommended parameters
Reviews
There are no reviews yet.