“FORTYFIVE” – the innovative blade specially developed by Diatex for clean 45° miter cuts on gres tiles, Laminam and Neolith slabs.
FORTYFIVE is the diamond blade for cutting ceramic slabs with thicknesses varying from 3 to 12mm. This diamond blade is designed with Sandwich technology and has a strengthened core to allow excellent miter cutting mg on Ceramic slabs up to 12-mm thick (use the reinforced MITERcut blade for thicker slabs). It produces precise, clean cuts with no chipping.
350-mm (14”) and 400-mm (16”) blade diameters are available.
The blade has a standard 60 mm arbor hole with a 50-mm reducer bushing. Please contact us for different arbor hole sizes or special connection needs (additional holes, concentric hole patterns, etc.).
Materials you can work with the “FORTYFIVE” blades can be used on ceramic slabs made of Laminam, Neolith, Techlam, Kerlite, Sinterflex, Kedra, Ultra, Atlasplan, Maxfine, Zero.3 and Project Evolution.
Working parameters for Porcelain Bridge Saw Blades 45° cutting
| Porcelain Tile thickness | RPM Ø350 | RPM Ø400 | Feed speed LM/min |
|---|---|---|---|
| 3 / 4.9 mm | 2150-2500 | 1900-2200 | 1.5 – 1.8 |
| 5 / 9 mm | 2150-2500 | 1900-2200 | 1.2 – 1.5 |
| 10 / 12 mm | 2150-2500 | 1900-2200 | 1.0 – 1.2 |
| 13 / 20 mm | 2150-2500 | 1900-2200 | 0.8 – 1.0 |
Diatex recommendations for porcelain blades:
- While entering and exiting the cut, reduce the speed feed by 40-50%
- While cutting at 45°, reduce the speed feed by 40%
Reviews
There are no reviews yet.