Widia Engraving Router Bit 5x30mm, 170mm long for Marble
Engraving router bit for marble and soft stone working in CNC machines.
When do you use this tool?
This engraving bit 5×30 is widely used by stone workers to make engravings and bass-relieves in 3 axes CNC machines and it’s used also for making 3D Sculptures in 5 axes machines. It’s also used in Robotic milling & stone sculpting.
The Main feature of a router bit 5×30 L170:
The main characteristic feature of this router bit 5×30 L170 is its length of 170mm. This length is requested when you need to go deep in a cavity, for example to make a pocket in the stone and the spindle could touch or hit the stone piece that the machine is working. In this case you could use a longer router bit like this one without the need of an extension tool.
A widia engraving router bit 5×30 has a tip diameter 5mm, so a radius of 2,5mm. It has a useful cutting size of 30 mm.
The fitting is 1/2 gas and the tools is available in holed version and not-holed version.
Recommended Working parameters for an engraving router bit 5×30 mm length 170 in marble
- Spindle speed: 2500/3500 rpm. More calcareous is the stone you are working higher speed you need
- Cutting Feed rate 100/150 mm per minute
- Maximum cutting depth 5 mm
- Maximum depth 30 mm
- We recommend a ramp input when the tool goes inside the stone
Often some customers want to use this 5×30 router bit even on small (light) machines that have not been made to work marble and granite.
In these cases, the recommended parameters above may not work well. For example, it may be necessary to work at higher speeds because the maximum spindle torque used for lightweight materials, such as forex or wood, is at higher speeds. We therefore recommend that you check the parameters correctly and for any doubt do not hesitate to contact us: firstname.lastname@example.org
Engraving router bits related to this one:
|Cod: FKL5-30 167||Cod: FKL5-30 167F|