Dirt Repellent STOP DIRT – Fila

Dirt Repellents STOP DIRT – Fila

Fila Stop Dirt creates a protective barrier against dirt and debris on textured and natural finish porcelain tiles. It makes cleaning quick and easy and surfaces hygienic improving the material’s resistance to dirt

You can use it on Textured Porcelain Tiles, Unpolished Porcelain Tiles, and Lappato Porcelain Tiles

Advantages

• Does not form a surface film
• Provides prolonged protection over time
• Does not alter the material’s anti-slip rating (tests conducted in conformity with B.C.R.A. and ASTMC 1028-2007 methods)
• For interior and exterior use
• UV resistant and non-yellowing

Coverage

• With one litre: Textured, natural and Lappato porcelain tiles up to 70 m²

Application

• No dilution required: The product is ready to use
  1. Wash the floor thoroughly using Deterdek (cement grout)
  2. Apply Fila Stop Dirt to a clean and dry floor also treating the grout, covering evenly with a fleece or other suitable applicator
  3. Rub the surface with a cloth or floor scrubber with a white disc
  4. Fully remove any residues within 10 minutes, either manually using a microfibre cloth or with a single-disc floor scrubber
  5. After at least 12 hours, before treading on the treated surface, remove any product residues using a clean microfibre cloth
• Application on the untreated surface to be restored:
  1. Wash the floor using Fila Stain and Deterdek
  2. Apply on the dry surface in the manner described above

Important Information

• The product may enhance the color of the material or grouting; carry out a spot test beforehand. Aerate rooms during use. Do not apply to matt-finish lappato porcelain tiles

Stop Dirt technical sheet