Widia Carving router bit h170 mm – Marble
Carving router bit for marble and stone working in CNC machines.
Used both in CNC machines and robots as well.
When do you use this tool?
TheseCarving bits are widely used by stoneworkers to make engravings and bass-relieves with 3 axes CNC machines and they are used also for making 3D Sculptures with 5 axes machines. They are also used in Robotic milling & stone sculpting too.
The main feature of this product:
The main characteristic feature of this router bits is the total length of 170 mm.
This length is requested when you need to go deep in a cavity, for example, to make a pocket in the stone and the spindle could touch or hit the stone piece that the machine is working. In this case, you could use a longer router bit like this one without the need of an extension tool.
There is also a shorter version of these engraving router bits with 110 mm total length.
Other characteristics:
The fitting is 1/2 gas and the tools are available in the holed version and the not-holed version.
Recommended working parameters
- Spindle speed: 8000 rpm. More calcareous is the stone you are working higher speed you need
- Cutting Feed rate 100/150 mm per minute
- Maximum cutting depth 5 mm
- We recommend a ramp input when the tool goes inside the stone
Well known
Often some customers want to use these router bits even on small (light) machines that have not been made to work marble and granite.
In these cases, the recommended parameters above may not work well. For example, it may be necessary to work at higher speeds because the maximum spindle torque used for lightweight materials, such as forex or wood, is at higher speeds. We therefore recommend that you check the parameters correctly and for any doubt do not hesitate to contact us:
In the table below you can check the dimensions for each Carving router bit model
CODE | TIP | RADIUS | USEFUL CUT HEIGHT |
USEFUL LENGTH |
---|---|---|---|---|
FKL3-30 167 FKL3-30 167F |
3×30 mm | 1,5 mm | 30 mm | 110 mm |
FKL3-50 170 FKL3-50 170F |
3×50 mm | 1,5 mm | 50 mm | 110 mm |
FKL3-175 FKL3-175F |
3×120 mm | 1,5 mm | 120 mm | 120 mm |
FKL5-30 167 FKL5-30 167F |
5×30 mm | 2,5 mm | 30 mm | 110 mm |
FKL5-50 170 FKL5-50 170F |
5×50 mm | 2,5 mm | 50 mm | 110 mm |
FKL5-175 FKL5-175F |
5×120 mm | 2,5 mm | 120 mm | 120 mm |
FKL8-30 167 FKL8-30 167F |
8×30 mm | 4 mm | 30 mm | 110 mm |
FKL8-50 170 FKL8-50 170F |
8×50 mm | 4 mm | 50 mm | 110 mm |
FK20100 FK20100F |
20×100 mm | 10 mm | 100 mm | 120 mm |
Danijel Vukadin (verified owner) –
Very good