Round suction cup d 200 mm
Click to enlarge
Round suction cup d 130 mm
Round suction cup Ø130 mm 115,80 € Net of VAT
Back to products
Round suction cup d 250 mm
Round suction cup Ø250 mm 190,60 € Net of VAT

Round suction cup Ø200 mm

(2 customer reviews)

141,00 € Net of VAT

Shipped in 3-4 weeks

    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +
    • +

    Write here your custom height. For example: 70 or 105.3

    Write here your custom height. For example: 53 or 85.3

    • +
    • +
    • +
    • +
    • +
SKU: GNC200T Category:
Description

200-mm (7.87 inch) diameter round CNC suction cup manufactured (also known as vacuum pods or vacuum cups)

Round 200 mm diameter base CNC vacuum pod. Choose the height you need and the other features in our configuration wizard.
Round vacuum cups are mainly used in the glassworking CNC centers.
Please note: Other shapes and diameters are available as well.

Suction cup features:

  • High-grip hot-vulcanized rubber pads
  • Hand-assembled
  • Made of Anodized aluminum
  • Fast-connect vacuum-tube fitting
  • Top pad and gasket made of stain-proof rubber with vinyl-carbon look
  • Stainless steel screws
  • Modular system
  • Water-repellent stain-proof carbon-look column
  • Height tolerance ± 0.02 mm

Choose the vacuum pods that meet your needs and write to us if you need help.
Circular anodized aluminum suction cup set with a diameter of 200 mm;  the top pad (on which the piece rests) is made of hot-vulcanized  EPDM rubber.
EPDM rubber has a very strong grip and forms a tight seal to prevent the piece from moving.
The unit uses a fast-connect tube fitting to create a vacuum.
All of our screws are stainless steel to prevent rusting. Height and planar tolerances are 0.02 mm.

VACUUM AREA
(mm²)		 HOLDING FORCE
(N)		 FLOW RATE
(m³/h)		 CONSUMPTION
(l/min)
25,430 2115 2.0 30.0

If your CNC Brand is not listed in the dropdown menu above, choose the “CNC brand not listed” option. If you choose a non-standard intermediate height, it may take a few days longer than expected to manufacture the suction cup.

Related spare parts: 
Round suction-cup spare parts

Additional Info
Brand

GNC Meccanica
Diameter

200 mm -7.9"
Top

EPDM
Use with

CNC
Reviews (2)

2 reviews for Round suction cup Ø200 mm

  1. Thomas Cusumano (verified owner) –

    They are excellent quality at a good price

  2. tsianelis nikolaos (verified owner) –

    This what I need. Bravo Marco’s. Thank you.

Add a review

Your email address will not be published. Required fields are marked *

Request info

    Hello, I need to ask you a question. The two pods I received from you already work perfectly. I have one problem with moving your pods without turning off my vacuum pump. Is there a way that I can move your pods around my table without turning off my vacuum pump. With the original pods from Brembana, we just lift the bottom lip and it releases the vacuum so we can move the pod then just drop it back on the table Let me know if you have a valve that can be used with your pods. Thanks
  1. 0 votes
    Q Hello, I need to ask you a question. The two pods I received from you already work perfectly. I have one problem with moving your pods without turning off my vacuum pump. Is there a way that I can move your pods around my table without turning off my vacuum pump. With the original pods from Brembana, we just lift the bottom lip and it releases the vacuum so we can move the pod then just drop it back on the table Let me know if you have a valve that can be used with your pods. Thanks answer now
    Asked by thomas on April 10, 2020 8:04 am
    Answered by the admin
    Hi, Thomas,
    it happened to us that customers with a Brembana CMS machine would tell me what you are telling me.
    Actually, in the old Brembana suction pods, there was a thicker lip seal and this method of detaching the pod is common in Brembana customers.
    However, the lip of our pod is thin and you risk damaging it if you pinch it. It's thin because the vacuum plan is composed of many cavities to improve the grip and reduce water planing.
    I don't know if a valve works, but you can do this test:
    Disconnect the pipe from the side of the distributor or from the base of the suction cup.
    If the vacuum force decreases and the suction cup comes off then the valve may work.
    the bigger the pod, the heavier it is and the less effective this thing will obviously be. But the pods are designed to have great gripping force. Imagine that a 200mm suction cup has a gripping force of 211Kg.
    Then:
    First test: disconnect the pipe and pry with a finger and see if it comes off.
    Second test: halfway along the length of the tube put a 3-way switch. Halfway it goes into the atmosphere (open the way to lose), open it goes to vacuum. Valve to be rotated 90 °, not 180 °
     
    2. Hello, my name is Tom, located, Florida. USA. I have a CMS Brembana CNC machine Junior 1.40 for glass working. I am looking to replace some of my suction pods.  They are 8” in diameter and 4” high. With the rubber lip around the outside. I see you have what I need, I was just concerned about the shipping charges. How much would it cost approximately for 4 pods to my factory? My zip code is 33063.
  2. 0 votes
    Q Hello, my name is Tom, located, Florida. USA. I have a CMS Brembana CNC machine Junior 1.40 for glass working. I am looking to replace some of my suction pods.  They are 8” in diameter and 4” high. With the rubber lip around the outside. I see you have what I need, I was just concerned about the shipping charges. How much would it cost approximately for 4 pods to my factory? My zip code is 33063. answer now
    Asked by Tom Cusumano on March 3, 2020 10:14 pm
    Answered by the admin

    Hi Tom, the prices do not include the shipping cost because they vary widely among countries.
    You can add 4 suction pods to the cart and start the checkout process. Adding your shipping address you will have the total cost including the shipping to your factory.
    I have simulated it and the shipping cost for all the 4 round suction pods is around 70 $.

Related products

Round suction cup d 65 mm

Round suction cup Ø65 mm

GNC Meccanica
91,40 € Net of VAT
65-mm (2.56 inch) diameter round CNC suction cup (also known as vacuum pods or vacuum cups) 65-mm diameter round suction
Add to cart
Quick view
Round suction cup d 250 mm

Round suction cup Ø250 mm

GNC Meccanica
190,60 € Net of VAT
250-mm (9.84 inch) diameter round CNC suction cup manufactured (also known as vacuum pods or vacuum cups) 250-mm diameter round
Add to cart
Quick view
Round suction cup d 150 mm
Amastone - Round suction cup for CNC

Round suction cup Ø150 mm

GNC Meccanica
124,50 € Net of VAT
150 mm (5.91 inch) diameter round CNC suction cup manufactured (also known as vacuum pods or vacuum cups) Round vacuum
Add to cart
Quick view
Round suction cup d 130 mm

Round suction cup Ø130 mm

GNC Meccanica
115,80 € Net of VAT
130-mm diameter (5.12 inch) round CNC suction cup manufactured (also known as vacuum pods or vacuum cups) Suction-cup features: Hand-assembled
Add to cart
Quick view
Suction cup for CNC Router - Special H=30 mm
Suction cup 70x240 mm for CNC Router - Special H=30 mm

Suction cup for CNC Router – Special H=30 mm

GNC Meccanica
124,50 € – 206,90 € Net of VAT
GNC Suction Cup for “small CNC Router” with special height of 30 mm This suction cup is used to hold
Select options
Quick view