Replacement Pull stud bolts (Retention knobs) for tool holder cone ISO 40 and BT 40
The pull stud bolt is the only part connecting the machining center and the tooling. It is one of the most important components because this one bolt retains the tooling and it must stand up to severe cutting forces. Because the pull stud is used under severe conditions it is regarded as a consumable item. This is why regular inspection and exchange is essential. We suggest replacing the pull stud every 6/8 months
Here you find Pull studs, Retention knobs, for ISO40 and BT40 tool holders for a lot of glass and stone CNC Machines such as Breton, INtermac, Bimatech, Bavelloni, Thibaut and so on.
Select the correct pull studs’ code related to the brand of your CNC machine following the table below.
The Pull studs can have different diameters and lengths, please make sure that the pull stud you order is the correct one for your machine. If you need help do not hesitate to contact us.
| Code | Machine brand | Diameter | Length | Type |
|---|---|---|---|---|
| AAG04 | Breton, Busetti, Intermac, FA, Pedrini, Terzago | 19 mm | 54 mm | M16 Radius |
| AAG05 | Bimatech | 19 mm | 54 mm | M16 Radius |
| AAG06 | Helios | 19 mm | 57 mm | M16 Radius |
| AAG07 | Thibaut | 19 mm | 57 mm | M16 Radius |
| AAG08 | Lovati, Omag | 19 mm | 54 mm | M16 angle 15° |
| AAF35 | Northwood | 18.9 mm | 44.5 mm | M16 angle 45° |
| AAF49 | Achilli, Agut, Bavelloni, Brembana CMS new type, Brembana CMS old type, Campagnola & Fedeli, Chiarini, Cobalm, DIN 69871/A, Donatoni, Gadia, Pavoni, Prussiani, Prussiani Old Type, Ravelli, Scandinvent. | 19 mm | 54 mm | M16 angle 15° |
| AAF89 | Denver, Loffler, Noat, Park Industries, VEM | 15 mm | 60 mm | M16 angle 45° |
tsianelis nikolaos (verified owner) –
Bravo my friend
Michael (verified owner) –
I do not usually do rating but because on the service I have had from Amastone I decided to do one. Being in Australia we do not have a big aftermarket parts supplier base for our Intermac machines so any opportunity to purchase outside of the OEM I am happy to try. From all of my purchase from Amastone I have been extremely happy, prices are very reasonable and delivery is very quick, usually within a week if in stock. My last purchase of pull studs were soo much cheaper than the Intermac equivalent, from what I can see the quality of the stud is as good as the OEM part, the only difference is the finish coating, whether this makes a difference in the long term, time will tell but I am very happy so far.