Wateroilproof solvent based protective solution – TurboSeal Royal

 Wateroilproof solvent based protective solution – TurboSeal Royal

The TurboSeal Royal product is a solvent-based anti-stain and anti-humidity treatment solution.

This product penetrates the surface of the stone creating an invisible barrier against moisture and rising humidity and
protection against stains: Oil, grease, coffee, tea, food, general dirt, mold, and mildew.
The product will not change the natural aspect of the stone or create any type of
the film, allowing permeability vapor moisture to escape, and is UV-resistant.

• Suitable for honed and polished granite, marble, natural and artificial engineered
  stones, terra cotta, porcelain, quarry, cement pavers.
• For interior and exterior use.
• For Flooring-Work surfaces ( kitchen, bathroom ), showers and areas in
  constant contact with water.
• Effective prevention of shadow marks and yellow stains caused by Iron oxidation.

How to use?

Safety rules: adequate ventilation during and after use of the product is essential

1. Clean and dry the surface
2. Make sure that the surface temperature is lower than 10 ° C
3. Apply small quantities of the product using a low-pressure pump
4. Remove, if present, the excess product with a cloth

The TurboSeal Royal treatment has a duration of 2 years if stored at a temperature between 18-25 ° C and kept away from sources of heat, humidity and sunlight.

• Download the technical schedule